AEG 64800 manual SO280

Page 11

To deactivate these audible signals, press the "small load" pushbutton for about 3 seconds, at the end of which an audible signal informs you that the audible signals have been deactivated.

SO280

To reactivate these audible signals, press the "small load" pushbutton for about 3 seconds, at the end of which an audible signal informs you that the audible signals have been reactivated.

Both operations (to deactivate or reactivate the audible signals) must be carried out before starting a washing programme; the setting will remain memorised after switching off the dishwasher.

11

Image 11

Contents Ökofavorit Please read these user instructions carefully Dear customerContents Child safety Safety instructionsUsing your dishwasher for its intended purpose Before using your dishwasher for the first timeYour dishwasher in day-to-day use Disposing of your old machine Disable the door lock so that the door no longer closesDisposing of packaging and old machine Disposing of the packagingEconomical and ecological dishwashing Inside of the appliance Description of the applianceSalt Programme phase indicator lightsIndicator lights Door handle Digital display Small load pushbuttonDelay start pushbutton SO280 Setting the water hardness range Before using your dishwasher for the first timeTo set a different level, proceed as follows To fill Filling with special saltEnsure that the lid is closed after every refill Rinse-aidFilling up the rinse-aid Adjusting the dose Loading cutlery and dishes To lower the prongs Lower basketRemovable knife basket Cutlery basket Upper basket Adjusting the height of the upper basket Use of detergent If using detergent in tablets proceed as followsBIO programmes and compact powders Washing programmes Cycle description Approximate valuesOperating instructions Setting of the programme may occur 8a. Set and start the programme without delay start8b. Set and start the programme with delay start At the end of the washing programme To cancel a programmePage Cleaning the filters Maintenance and cleaningInternal and external cleaning Together What to do, when Flashing fault code appearsVisible lime deposits or white film on the dishes Problems occur during use of the dishwasherDishes are not clean Wash results are not satisfactoryCustomer service Hints for test centres Technical specifications Technical dataLevelling Installation and connection instructionsAdjusting the worktop Fitting under a counterConnecting the water supply Water outlet connection Extension hoses Electrical connection Water protection systemCopyright by AEG 152985 56/1