AEG 64800 manual Before using your dishwasher for the first time, Setting the water hardness range

Page 12

12

Before using your dishwasher for the first time

1.Ensure that the electrical and water connections comply with the installation instructions.

2.Remove all packaging from inside the appliance.

3.Set the water softener.

4.Pour 0,5 l of water inside the salt container and then fill with salt.

5.Fill the rinse-aid dispenser.

Setting the water hardness range

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, German, French degrees and PPM (parts per Million).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 4.

If this level is not suitable for your area the softener should be adjusted.

Level						Water hardness							Use of salt

			°dH					°TH			PPM
			(german degrees)					(french degrees)			(parts per million)


0			0 - 4					0 - 8			0 - 80		NO
1			5	- 8				9 - 14			81 - 140		YES
2			9 - 11					15 - 20			141 - 200		YES
3			12	- 17				21 - 30			201 - 300		YES
4			18	- 22				31 - 40			301 - 400		YES
5			23	- 28				41 - 50			401 - 500		YES
6			29	- 33				51 - 60			501 - 600		YES
7			34	- 39				61 - 70			601 - 700		YES
8			40	- 45				71 - 80			701 - 800		YES
9			46	- 50				81 - 90			801 - 900		YES

Image 12

Contents Ökofavorit Dear customer Please read these user instructions carefullyContents Safety instructions Using your dishwasher for its intended purposeBefore using your dishwasher for the first time Child safetyYour dishwasher in day-to-day use Disable the door lock so that the door no longer closes Disposing of packaging and old machineDisposing of the packaging Disposing of your old machineEconomical and ecological dishwashing Description of the appliance Inside of the applianceProgramme phase indicator lights Indicator lightsDoor handle Digital display Small load pushbutton SaltDelay start pushbutton SO280 Before using your dishwasher for the first time Setting the water hardness rangeTo set a different level, proceed as follows Filling with special salt To fillRinse-aid Filling up the rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Lower basket Removable knife basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket If using detergent in tablets proceed as follows Use of detergentBIO programmes and compact powders Washing programmes Approximate values Cycle descriptionOperating instructions 8a. Set and start the programme without delay start Setting of the programme may occur8b. Set and start the programme with delay start To cancel a programme At the end of the washing programmePage Maintenance and cleaning Internal and external cleaningCleaning the filters Together Flashing fault code appears What to do, whenProblems occur during use of the dishwasher Dishes are not cleanWash results are not satisfactory Visible lime deposits or white film on the dishesCustomer service Hints for test centres Technical data Technical specificationsInstallation and connection instructions Adjusting the worktopFitting under a counter LevellingConnecting the water supply Water outlet connection Extension hoses Water protection system Electrical connectionCopyright by AEG 152985 56/1