AEG 64800 manual Approximate values, Cycle description

Page 25

	Approximate values **
Cycle description	Programme	Energy	Water
Cycle description	duration in	consumption	consumption
	minutes	in kWh	in litres

Hot prewash
Main wash up to 70°C
2 cold rinses	105 ÷ 115	1,4	18
1 hot rinse
Turbo drying

Warm prewash
Main wash up to 65°C
1 cold rinse	90 ÷ 100	1,2	15
1 hot rinse
Turbo drying

Cold prewash
Main wash up to 50°C
1 cold rinse	90 ÷ 100	1,1	15
1 hot rinse
Turbo drying

Cold prewash
Main wash up to 50°C
1 cold rinse	135 ÷ 145	0,8	13
1 hot rinse
Turbo drying

Main wash up to 50°C
1 cold rinse	35 ÷ 45	0,7	11
1 hot rinse

1 cold rinse
(to avoid food scraps from sticking	10	0,1	8
to the dishes).

**The times and consumption values are intended as a guide, and depend on the pressure and temperature of the water and also by the variations of the power supply.

25

Image 25

Contents Ökofavorit Please read these user instructions carefully Dear customerContents Using your dishwasher for its intended purpose Safety instructionsBefore using your dishwasher for the first time Child safetyYour dishwasher in day-to-day use Disposing of packaging and old machine Disable the door lock so that the door no longer closesDisposing of the packaging Disposing of your old machineEconomical and ecological dishwashing Inside of the appliance Description of the applianceIndicator lights Programme phase indicator lightsDoor handle Digital display Small load pushbutton SaltDelay start pushbutton SO280 Setting the water hardness range Before using your dishwasher for the first timeTo set a different level, proceed as follows To fill Filling with special saltFilling up the rinse-aid Rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Removable knife basket Lower basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket Use of detergent If using detergent in tablets proceed as followsBIO programmes and compact powders Washing programmes Cycle description Approximate valuesOperating instructions Setting of the programme may occur 8a. Set and start the programme without delay start8b. Set and start the programme with delay start At the end of the washing programme To cancel a programmePage Internal and external cleaning Maintenance and cleaningCleaning the filters Together What to do, when Flashing fault code appearsDishes are not clean Problems occur during use of the dishwasherWash results are not satisfactory Visible lime deposits or white film on the dishesCustomer service Hints for test centres Technical specifications Technical dataAdjusting the worktop Installation and connection instructionsFitting under a counter LevellingConnecting the water supply Water outlet connection Extension hoses Electrical connection Water protection systemCopyright by AEG 152985 56/1