AEG 64800 Door handle Digital display Small load pushbutton, Programme phase indicator lights

Page 9

4.	Door handle
5.	Digital display
6.	"Small load" pushbutton
	This is very useful and economical when only a few dishes need
	washing.
	Remember to load the crockery into both baskets. The indicator light
	corresponding to this option will come on when selected.
7.	Programme phase indicator lights
	As soon as you select a washing programme, this illuminates all the
	phases the programme consists of.
	As the programme progresses, the phase under way will illuminate. At
	the end of the programme the phase indicator lights turn off.
	Each phase is indicated with a symbol
	Prewash/Rinse and Hold
	Wash
	Rinse
	Drying
8.	Indicator lights
	Salt
	Illuminates when the salt has run out, to remind you to refill the
	salt container.
	Rinse aid
	Illuminates when the rinse aid has run out, to remind you to refill
	the rinse aid dispenser.	9

Image 9

Contents Ökofavorit Please read these user instructions carefully Dear customerContents Using your dishwasher for its intended purpose Safety instructionsBefore using your dishwasher for the first time Child safetyYour dishwasher in day-to-day use Disposing of packaging and old machine Disable the door lock so that the door no longer closesDisposing of the packaging Disposing of your old machineEconomical and ecological dishwashing Inside of the appliance Description of the applianceIndicator lights Programme phase indicator lightsDoor handle Digital display Small load pushbutton SaltDelay start pushbutton SO280 Setting the water hardness range Before using your dishwasher for the first timeTo set a different level, proceed as follows To fill Filling with special saltRinse-aid Filling up the rinse-aidEnsure that the lid is closed after every refill Adjusting the dose Loading cutlery and dishes Lower basket Removable knife basketTo lower the prongs Cutlery basket Upper basket Adjusting the height of the upper basket Use of detergent If using detergent in tablets proceed as followsBIO programmes and compact powders Washing programmes Cycle description Approximate valuesOperating instructions Setting of the programme may occur 8a. Set and start the programme without delay start8b. Set and start the programme with delay start At the end of the washing programme To cancel a programmePage Maintenance and cleaning Internal and external cleaningCleaning the filters Together What to do, when Flashing fault code appearsDishes are not clean Problems occur during use of the dishwasherWash results are not satisfactory Visible lime deposits or white film on the dishesCustomer service Hints for test centres Technical specifications Technical dataAdjusting the worktop Installation and connection instructionsFitting under a counter LevellingConnecting the water supply Water outlet connection Extension hoses Electrical connection Water protection systemCopyright by AEG 152985 56/1