Maytag MGT8885XS, W10291449A manual Settings, Fahrenheit and Celsius, Tones, Basic Functions, Clock

Page 9

Settings

Fahrenheit and Celsius

The temperature is factory preset to Fahrenheit, but can be changed to Celsius.

1.Press SETTINGS once.

“TEMP UNIT” will appear in the upper text area while “Fahrenheit Press (+) for Celsius” will scroll twice from right to left in the lower text area.

2.Press the Temp/Time “+” pad to change the temperature unit setting.

“CELSIUS. Press (+) for Fahrenheit” will scroll twice from right to left in the lower text area.

3.“CELSIUS Selected” will scroll twice from right to left in the lower text area. The temperature units have been changed.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

■Valid pad press

■End of Kitchen Timer (long tone)

■Function has been entered

Two tones

■Oven is preheated

Three tones

■Invalid pad press

Four tones

■End of cycle

Adjusting Sound On or Off

The oven sound is factory preset for On but can be changed to Off.

1.Press SETTINGS twice until “SOUND” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

2.Press the Temp/Time “+” pad to turn the sound Off. “OFF Press (+) for ON” will scroll twice from right to left in the lower text area.

3.“OFF Selected” will scroll twice from right to left in the lower text area. The sound has now been turned off.

Adjusting Sound Volume

The oven sound is factory preset for High but can be changed to Low.

1.Press SETTINGS three times until “SOUND VOLUME” will appear in the upper text area and “HIGH Press (+) for LOW” scrolls twice from right to left in the lower text area.

2.Press the Temp/Time “+” pad to turn the sound Low. “LOW Press (+) for High” will scroll twice from right to left in the lower text area.

3.“LOW Selected” will scroll twice from right to left in the lower text area. The sound volume has now been changed.

Adjusting End Tone On or Off

The end tone is factory preset for On but can be changed to Off.

1.Press SETTINGS four times until “END TONE” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

2.Press the Temp/Time “+” pad to turn the end tone Off. “OFF Press (+) for ON” will scroll twice in the lower text area.

3.“OFF Selected” will scroll twice from right to left in the lower text area. The end tone has now been turned off.

Adjusting Keypress Tone On or Off

The keypress tone is factory preset for On but can be changed to Off.

1.Press SETTINGS five times until “KEYPRESS TONE” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

2.Press the Temp/Time “+” pad to turn the keypress tone Off. “OFF. Press (+) for ON” will scroll twice in the lower text area.

3.“OFF Selected” will scroll twice from right to left in the lower text area. The keypress tone has now been turned off.

Adjusting Reminder Tone On or Off

The reminder tone is factory preset for On but can be changed to Off.

1.Press SETTINGS six times until “REMINDER TONE” appears in the upper text area and “ON. Press (+) for OFF” scrolls twice from right to left in the lower text area.

2.Press the Temp/Time “+” pad to turn the reminder tone Off. “OFF. Press (+) for ON” will scroll twice in the lower text area.

3.“OFF Selected” will scroll twice from right to left in the lower text area. The reminder tone has now been turned off.

Clock

The clock can be set to display time in a 12-hour or 24-hour format. The clock is factory preset at the factory for the 12-hour format.

To Change the Clock to 24-Hour Format:

1.Press SETTINGS seven times until “12/24 HOUR” scrolls from top to bottom in the upper text area and “12 HR Press (+) for 24 Hr” appears in the lower text area.

2.Press the Temp/Time “+” pad once to select 24 hour and again to select 12 hour.

3.Wait 30 seconds or press CANCEL to accept the setting.

To Set the Clock:

Before setting, make sure the oven and Kitchen Timer are off.

1.Press CLOCK. “Set Time” will appear in the upper text area.

2.Press the Temp/Time “+” or “-” pads until the desired time is displayed.

3.“Press CLOCK” will appear in the upper text area and “or Push START” will appear in the lower text area.

4.Press CLOCK or START. “Time Set” will appear in the upper text area. Once it disappears, the time is set.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents GAS Double Oven Range Table DES Matières Your safety and the safety of others are very important Range SafetyAnti-Tip Bracket For self-cleaning rangesCooktop USE Setting Recommended USE LightCooktop Controls To SetGriddle Accessory To CleanSealed Surface Burners Home Canning Cookware CharacteristicsCookware To UseKitchen Timer CancelElectronic Oven Controls DisplayFahrenheit and Celsius SettingsTones Basic FunctionsControl Lockout Oven Temperature ControlOven USE Aluminum FoilPositioning Racks and Bakeware Meat Thermometer BakewareOven Vents BakingBroiling Chart To Broil Using Hi/Low Temperature SettingsFood Rack Position Setting BroilingConvection Baking on some models Convection Cooking Lower Oven OnlyConvection Roasting on some models To Set Convect BakeAutomatic Shutoff/Sabbath Mode Keep Warm FeatureTo Cancel Keep Warm Feature To Disable Sabbath ModeTo Cancel a Favorite Cycle Delay StartFavorite To Save a Cooking Function as a FavoriteTo Set a Delay Start Self-Cleaning CycleRange Care Prepare OvenTo Delay Start Self-Clean To Self-CleanOven light will not work during the Self-Cleaning cycle When the self-clean cycle endsGeneral Cleaning Oven Door Oven LightTo Replace To RemoveTroubleshooting Accessories Assistance or ServiceU.S.A CanadaLimited Warranty Maytag Major Appliance WarrantyItems Excluded from Warranty This limited warranty does not coverVotre sécurité et celle des autres est très importante Sécurité DE LA CuisinièreCuisinière autonettoyante La bride antibasculementRéglage Utilisation Recommandée Commandes de la table de cuissonUtilisation DE LA Table DE Cuisson RéglagePlaque à frire accessoire Brûleurs de surface scellésNettoyage Ustensiles de cuisson UtilisationUstensile Caractéristiques Affichage Commandes Électroniques DU FourAnnulation Lampes du fourFahrenheit et Celsius RéglagesSignaux sonores Fonctions basiquesMode Sabbat Horloge Arrêt automatique au bout de 12 heuresLangue Verrouillage des commandes Utilisation DU FourPapier d’aluminium Pour enlever les grilles de four GrillesPour replacer les grilles de four Positions de grille Four supérieur Cuisson au fourThermomètre à viande Ustensiles de cuisson au fourÉvents du four Cuisson au fourCuisson au gril Tableau DE Cuisson AU Gril Cuisson par convection four inférieur uniquementDurée DE Cuisson DU Aliment Position DE LA RéglageCuisson au four par convection sur certains modèles Caractéristique Keep WarmRéglage de la cuisson au four par convection Rôtissage par convection sur certains modèlesArrêt automatique/Mode Sabbat Mise en marche différée FavoriProgramme dautonettoyage Entretien DE LA CuisinièrePréparation du four Préparation de la table de cuissonAutonettoyage Comment fonctionne le programmePour différer l’autonettoyage Lorsque le programme d’autonettoyage est terminéNettoyage général Porte du four Lampe du fourCavité DU Four Grilles DU FourDépannage Le programme d’autonettoyage ne fonctionne pas Des messages saffichentLaffichage indique-t-il une heure clignotante? La porte du four est-elle ouverte?Au Canada Assistance OU ServiceGarantie Limitée Articles Exclus DE LA GarantieLa présente garantie limitée ne couvre pas W10291449A
Top Page Image Contents