Henny Penny EEE-144, EEE-141, EEE-143 Discarding OIL from VAT Using Optional OIL Discard Shuttle

3-13. DISCARDING OIL FROM VAT USING OPTIONAL OIL DISCARD SHUTTLE

Figure 1

Figure 2

Figure 3

909

Model EEE-141,142, 143, 144

WITH PROLONGED USE, THE FLASHPOINT OF OIL IS REDUCED. DISCARD OIL IF IT SHOWS SIGNS OF EXCESSIVE SMOKING OR FOAMING. SERIOUS BURNS, PERSONAL INJURY, FIRE, AND/ OR PROPERTY DAMAGE COULD RESULT.

1.Open the door, lift-up on the drain pan stop and pull-out the drain pan assembly, using the handle on the drain pan. Figures 1 & 2.

2.Press and hold (either one) until display shows “*FILTER MENU*”, along with “1.EXPRESS FILTER?”.

3. Press and release button twice until display shows “3.DISPOSE”. Press √ button and display shows “DISPOSE?” “YES NO”.

4.Press √ button and “IS DISPOSAL UNIT IN PLACE? “YES NO”shows in display.

If Bulk Oil Dispose is set to “YES”, “DRAIN VAT?” YES NO” shows in display

5.With discard shuttle rolled into place (Figure 3), press √ button and display shows “OPEN DRAIN”. Pull-out on drain knob to open drain and display shows “DRAINING”. Oil now drains from the vat into the shuttle.

6.Display shows “VAT EMTY “YES NO”. Verify that vat is empty, and press √ button.

7.Display shows “CLN VAT COMPLETE” “YES NO”. Once vat is clean, press √ button. and display shows “CLOSE DRAIN”. Push-in on the drain knob.

If Bulk Oil Dispose is set to “YES”, “√=PUMP” “X=DONE shows in the display. Press X button.

8.Display shows “MANUAL FILL POT”, followed by “IS POT

FILLED?”, along with “YES NO”. Fill the vat to the lower indicator line on the rear of the vat and then press √ button. See Filling or Adding Oil instructions from Section 3-3.

Fryer returns to normal operation.

9.Remove the discard shuttle from under fryer and replace with the filter pan assembly.

3-16