Henny Penny EEE-142, EEE-141, EEE-144, EEE-143 warranty Mixed Filter Tracking

Model EEE-141,142, 143, 144

5-1. MODIFYING PRODUCT	Mixed Filter Tracking
SETTINGS (Continued)	Filter After X Number of Loads
	13b. Press button until “FILTER AFTER...” flashes in the

left display along, and the number of cook cycles between filters shows in the right display. Press the product buttons, or the and buttons, to change this value of 0 to 99 loads. This needs set for each product.

>Load Compensation, Load Compensation

Reference, Full Heat, PC Factor<

14.Press button until “LD COMP” shows in the display, along with the load compensation value. This automatically adjusts the time to account for the size and temperature of the cooking load.

Press the product buttons, or the and buttons, to change this value of 0 to 20.

15.Press button until “LCMP REF” shows in the display along with the load compensation average temperature. (if load compensation is set to “OFF”, then “_ _ _” shows in display and setting cannot be programmed) This is the average

cooking temperature for each product. The timer speeds up at temperatures above this setting and slows down at temperatures below this setting. Press the product button, or the and buttons, to change this value.

16. Press button until “FULL HT” shows in the display along with the full heat value in seconds, which means the heat is on as soon as a timer button is pressed, for the programmed length of time. Press the product buttons, or the and buttons, to change this value of 0 to 90 seconds.

17. Press button until “PC FACTR” shows in the display along with the proportional temperature, which helps to keep the oil from over-shooting the setpoint temperature. Press the product buttons, or the and buttons, to change this value of 0 to 50 degrees.

•	Use	button to go back to previous menu items.
•	Press	button when finished with the current product, to
	return to the “SELECT PRODUCT” step.
•	Press and hold		button to exit PRODUCT PROGRAM
	Mode.
309			5-3