Henny Penny EEE-144 Degrees Fahrenheit or Celsius SP-1, Language SP-2, System Initialization SP-3

Model EEE-141,142, 143, 144

6-1. SPECIAL PROGRAMPress and hold the button for 5 seconds until “LEVEL 2”

MODE (Continued)followed by, “SP PROG” and “ENTER CODE” show in the display.

Enter code 1,2,3, and “SP-1”, “TEMP”, “FORMAT” show in the displays.

If a bad code is entered, a tone sounds and “BAD CODE” shows on the display. Wait a few seconds, the controls revert back to the cook mode, and repeat the above steps.

To exit from the Special Program Mode at any time, press

and hold button for 2 seconds.

Degrees Fahrenheit or Celsius (SP-1)

The left display flashes “SP-1” and “TEMP”, “FORMAT”.

Press the or buttons to choose ºF or ºC.

• Use button to go back to previous menu items

• Press button when finished with the current Level 2 step

Language (SP-2)

Press button and “SP-2” and “LANGUAGE” flash on the

left display. Press the or buttons to select the desired language.

System Initialization (SP-3)

Press button and “SP-3” and “DO SYSTEM INIT” flash in the display, along with “INIT” on the right display. To reset the controls to factory default settings, press and hold √ button and control counts down “IN 3”, “IN2”, “IN 1”. Once display shows “-INIT-” & *DONE* the controls are reset to factory defaults.

Audio Volume (SP-4)

Press button and “SP-4” and “VOLUME” flash in the left display. Press the or , or use product buttons, to adjust the volume of the speaker, 10 being the maximum value and 1 the minimum.

909 6-2