Henny Penny OFE/OFG-324, OFE/OFG-322, OFE/OFG-321, OFE/OFG-323 manual Blower Motor

Model OFE/OFG-321,322,323,324

2-16. GAS CONTROL VALVE ASSEMBLY (Continued)

7.With the bracket dropped down, remove the two screws behind the bracket securing the gas control valve to the bracket.

8.Install the new gas control valve in reverse order.

2-17. BLOWER MOTOR

ASSEMBLYThe blower motor assembly induces the draft for the burners. If the blower motor fails, the air switch will fail to close, causing an “E-20B” error code in the display.

1. Remove electrical power supplied to the unit.

To avoid electrical shock or property damage, move the POWER switch to OFF and disconnect main circuit breaker, or unplug cord at wall receptacle.

2.Remove screws securing the two rear covers to the unit.

3.Remove the wire cover from the blower motor housing.