Henny Penny OFE/OFG-323, OFE/OFG-324, OFE/OFG-322 manual Temperature Probe, Replacement, With wrench

Page 7

 

Model OFE/OFG-321,322,323,324

2-6. TEMPERATURE PROBE

7. Tighten the compression nut hand tight and then a half turn

REPLACEMENT

with wrench.

(Continued)

 

 

Excess force will damage temperature probe.

8.Connect new temperature probe to PC board and replace control panel.

9.Replace shortening.

10.Turn power on and check out fryer.

606

2-7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
Gas Units Maintenance HintsHigh Temperature Limit Control IntroductionLimit Control High TemperatureHigh Temperature Complete Control Breaker, or unplug cord at wall receptacle Power SwitchPower switch to OFF and disconnect main circuit To avoid electrical shock or property damage, moveElectric Temperature Probe ReplacementWith wrench Temperature ProbeReplacement Tighten the compression nut hand tight and then a half turnFlame Sensor Pilot / Ignitor AssemblyModel OFE/OFG-321,322,323,324 11. I/O Power Supply Speaker Assembly Vacuum SwitchSpeaker assembly emits audible signals to let the operator Filter Switch GAS Control Valve GAS Control Valve Assembly Blower Motor Assembly Heating Elements Electric only Voltage Wattage Resistance Ohms cold ReplacementTemperature Spreader Probe Heating Contactors Electric only Checkout Power Removed30 31 34 35 Mercury Contactor Contactors Electric only Heating Checkout Power SuppliedSpeaker Assembly Terminals. The tube must Never be in such a position Line under and away from all electrical power wiresWhere it could accidentally touch the electrical power Electric UnitsLimit Control Electric Units Actuator Motor ReplacementIf applicable Autolift Actuator Motor ReplacementAutolift Actuator Motor Replacement Remove control panel Disconnect connectors from PC board Autolift PC Board Replacement