Henny Penny OFE/OFG-324, OFE/OFG-322, OFE/OFG-321, OFE/OFG-323 manual Complete Control

Page 4

Model OFE/OFG-321,322,323,324

2-4. COMPLETE CONTROL

PANEL REPLACEMENT Should the control board become inoperative, follow these instructions for replacing the board.

1. Remove electrical power supplied to the unit.

To avoid electrical shock or property damage, move the POWER switch to OFF and disconnect main circuit breaker, or unplug cord at wall receptacle.

2.Remove the four screws securing the control panel and lift out.

3.Unplug the wire connectors going to the control board.

4.Install new control panel in reverse order.

When plugging connectors onto new control panel, be sure the connectors are inserted onto all of the pins, and that the connectors are not forced onto the pins backwards. If not connected properly, damage to the board could result.

2-5. POWER SWITCH 1. Remove electrical power supplied to fryer.

To avoid electrical shock or property damage, move the POWER switch to OFF and disconnect main circuit breaker, or unplug cord at wall receptacle.

2.Remove control panel.

3.Label and remove the wires from the switch. With test instrument, check across the terminals of the switch with the switch in the ON position, then in the OFF position. With the switch in the ON position, the circuit should be closed. With the switch in the OFF position, the circuit should be open. If the switch checks defective, replace by continuing with this procedure.

2-4

203

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Maintenance Hints High Temperature Limit ControlIntroduction Gas UnitsHigh Temperature Limit ControlHigh Temperature Complete Control Power Switch Power switch to OFF and disconnect main circuitTo avoid electrical shock or property damage, move Breaker, or unplug cord at wall receptacleTemperature Probe Replacement ElectricTemperature Probe ReplacementTighten the compression nut hand tight and then a half turn With wrenchFlame Sensor Assembly Pilot / IgnitorModel OFE/OFG-321,322,323,324 11. I/O Power Supply Speaker Assembly Vacuum SwitchSpeaker assembly emits audible signals to let the operator Filter Switch GAS Control Valve GAS Control Valve Assembly Blower Motor Assembly Heating Elements Electric only Replacement Voltage Wattage Resistance Ohms coldTemperature Spreader Probe Heating Contactors Electric only Checkout Power Removed30 31 34 35 Mercury Contactor Heating Checkout Power Supplied Contactors Electric onlySpeaker Assembly Line under and away from all electrical power wires Where it could accidentally touch the electrical powerElectric Units Terminals. The tube must Never be in such a positionActuator Motor Replacement Limit Control Electric UnitsAutolift Actuator Motor Replacement If applicableAutolift Actuator Motor Replacement Remove control panel Disconnect connectors from PC board Autolift PC Board Replacement

OFE/OFG-323, OFE/OFG-324, OFE/OFG-321, OFE/OFG-322 specifications

Henny Penny, a leader in commercial cooking equipment, offers a range of innovative fryers known as OFE/OFG-322, OFE/OFG-321, OFE/OFG-324, and OFE/OFG-323. These fryers are designed to enhance food quality while optimizing operational efficiency, making them ideal for various foodservice establishments.

The OFE/OFG-322 model stands out with its advanced oil conservation technology. It features a unique oil filtration system that extends the oil life significantly, reducing operational costs associated with frequent oil changes. The fryer’s intuitive touchscreen interface makes it user-friendly, allowing staff to adjust cooking times and temperatures easily for consistent results across different menu items.

Moving to the OFE/OFG-321, this model is tailored for fast-paced environments where speed and reliability are crucial. With a rapid recovery time due to high-capacity heating elements, it ensures that cooking time remains minimal even during peak hours. The OFE/OFG-321 is equipped with safety features such as automatic shutoff, preventing overheating and ensuring safe operation.

The OFE/OFG-324 fryer emphasizes versatility, capable of handling a wide array of food types from fries to protein products. It incorporates multiple frying baskets, allowing for batch frying of different menu items simultaneously without flavor crossover. This model also utilizes a digital control system that monitors and adjusts frying conditions in real-time, ensuring that each batch meets quality standards.

Lastly, the OFE/OFG-323 is engineered for energy efficiency, promoting sustainable cooking practices. It employs a heat transfer system that minimizes energy loss, resulting in lower utility costs. This model also supports a variety of cooking techniques, offering settings for frying, frying to order, and pressure frying, making it adaptable to diverse kitchen needs.

All four models showcase Henny Penny’s commitment to high-quality construction, user-centric design, and cutting-edge technologies that improve food preparation standards. Integration of advanced safety mechanisms, ease of cleaning, and reliability across the entire range ensures that foodservice operators can maintain quality while maximizing productivity. The OFE/OFG series represents an investment in efficiency, quality, and safety, addressing the evolving demands of the restaurant industry.
Top Page Image Contents