Henny Penny OFE/OFG-322, OFE/OFG-324, OFE/OFG-321, OFE/OFG-323 manual Pilot / Ignitor, Assembly

Page 9

 

Model OFE/OFG-321,322,323,324

2-8. PILOT / IGNITOR

The Henny Penny open fryer (gas) has electronic spark ignition

ASSEMBLY

that lights a standing pilot. The gap between the spark electrode

 

and the pilot hood should be set at 1/8 of an inch.

 

1. Remove electrical power supplied to the unit.

To avoid electrical shock or property damage, move the POWER switch to OFF and disconnect main circuit breaker, or unplug cord at wall receptacle.

TO AVOID PERSONAL INJURY OR PROPERTY

DAMAGE, BEFORE STARTING THIS

PROCEDURE, MOVE THE MAIN POWER SWITCH

TO THE OFF POSITION. DISCONNECT THE MAIN

CIRCUIT BREAKERS AT THE CIRCUIT BREAKER

BOX OR UNPLUG SERVICE CORD FROM WALL

RECEPTACLE. TURN OFF THE MAIN GAS

SUPPLY TO THE FRYER AND DISCONNECT AND

CAP THE MAIN SUPPLY LINE TO FRYER, OR

POSSIBLE EXPLOSION COULD RESULT.

2.Remove the control panel as discussed in Complete Control Panel Replacement Section.

3.Disconnect the pilot gas line fitting at the pilot assembly with a ½ inch wrench.

4.With a Phillips head screwdriver, remove the two screws securing the pilot assembly to the mounting bracket.

5.Remove the flame sensor wire from the flame sensor.

6.Follow the wire from the spark ignitor back to the module, and remove wire from module.

7.After removing assembly from unit, pull the flame sensor out of the bracket as discussed in section 6-7. Insert flame sensor into new pilot/ignitor assembly.

8.Reinstall the new pilot/ignitor assembly in reverse order. Be extremely careful not to cross thread the pilot gas line fitting.

203

2-9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents High Temperature Limit Control Maintenance HintsIntroduction Gas UnitsLimit Control High TemperatureHigh Temperature Complete Control Power switch to OFF and disconnect main circuit Power SwitchTo avoid electrical shock or property damage, move Breaker, or unplug cord at wall receptacleElectric Temperature Probe ReplacementReplacement Temperature ProbeTighten the compression nut hand tight and then a half turn With wrenchFlame Sensor Pilot / Ignitor AssemblyModel OFE/OFG-321,322,323,324 11. I/O Power Supply Vacuum Switch Speaker AssemblySpeaker assembly emits audible signals to let the operator Filter Switch GAS Control Valve GAS Control Valve Assembly Blower Motor Assembly Heating Elements Electric only Voltage Wattage Resistance Ohms cold ReplacementTemperature Spreader Probe Checkout Power Removed Heating Contactors Electric only30 31 34 35 Mercury Contactor Contactors Electric only Heating Checkout Power SuppliedSpeaker Assembly Where it could accidentally touch the electrical power Line under and away from all electrical power wiresElectric Units Terminals. The tube must Never be in such a positionLimit Control Electric Units Actuator Motor ReplacementIf applicable Autolift Actuator Motor ReplacementAutolift Actuator Motor Replacement Remove control panel Disconnect connectors from PC board Autolift PC Board Replacement

OFE/OFG-323, OFE/OFG-324, OFE/OFG-321, OFE/OFG-322 specifications

Henny Penny, a leader in commercial cooking equipment, offers a range of innovative fryers known as OFE/OFG-322, OFE/OFG-321, OFE/OFG-324, and OFE/OFG-323. These fryers are designed to enhance food quality while optimizing operational efficiency, making them ideal for various foodservice establishments.

The OFE/OFG-322 model stands out with its advanced oil conservation technology. It features a unique oil filtration system that extends the oil life significantly, reducing operational costs associated with frequent oil changes. The fryer’s intuitive touchscreen interface makes it user-friendly, allowing staff to adjust cooking times and temperatures easily for consistent results across different menu items.

Moving to the OFE/OFG-321, this model is tailored for fast-paced environments where speed and reliability are crucial. With a rapid recovery time due to high-capacity heating elements, it ensures that cooking time remains minimal even during peak hours. The OFE/OFG-321 is equipped with safety features such as automatic shutoff, preventing overheating and ensuring safe operation.

The OFE/OFG-324 fryer emphasizes versatility, capable of handling a wide array of food types from fries to protein products. It incorporates multiple frying baskets, allowing for batch frying of different menu items simultaneously without flavor crossover. This model also utilizes a digital control system that monitors and adjusts frying conditions in real-time, ensuring that each batch meets quality standards.

Lastly, the OFE/OFG-323 is engineered for energy efficiency, promoting sustainable cooking practices. It employs a heat transfer system that minimizes energy loss, resulting in lower utility costs. This model also supports a variety of cooking techniques, offering settings for frying, frying to order, and pressure frying, making it adaptable to diverse kitchen needs.

All four models showcase Henny Penny’s commitment to high-quality construction, user-centric design, and cutting-edge technologies that improve food preparation standards. Integration of advanced safety mechanisms, ease of cleaning, and reliability across the entire range ensures that foodservice operators can maintain quality while maximizing productivity. The OFE/OFG series represents an investment in efficiency, quality, and safety, addressing the evolving demands of the restaurant industry.
Top Page Image Contents