Henny Penny OFE/OFG-323, OFE/OFG-324, OFE/OFG-322, OFE/OFG-321 Autolift Actuator Motor Replacement

Model OFE/OFG-321,322,323,324

2-22. AUTOLIFT ACTUATOR (MOTOR) REPLACEMENT

(if applicable) (Continued)

9.Remove the 2 front mounting screws from the actuator support plate.

10.Remove all the top screws, securing all the actuator support plates to the back shroud, to help loosen the back shroud.

11.Remove all remaining back shroud screws to loosen the back shroud from the unit.

12.Lift up on the entire back shroud assembly, enough to have the top of the actuator and bracket assembly to clear the top of the back shroud. Pull the top of the actuator and bracket assembly away from back shroud, as shown in Figure 10. Now, using a flat-blade screwdriver, push the clevis pin from the bracket and actuator and using pliers to pull the pin

from the assembly. Actuator can now be removed from unit.

13.Reassemble in reverse order.