GE Monogram ZET737 manual Hour Shut-Off, Cook and Hold, Hour, 24 Hour or Clock Black-Out

12 Hour Shut-Off

With this feature, should you forget and leave the oven on, the control will automatically turn off the oven after 12 hours during baking functions or after 3 hours during a broil function. If you wish to turn off this feature, follow the steps below.

		1. Press BAKE and BROIL at the
BAKE	B R O I L	same time for 2 seconds until
		the display shows “SF.”
D E L A Y		2. Press DELAY START. The
		display will show “12 shdn”
S T A R T
		(12 hour shut-off). Press
		DELAY START again and the
		display will show “no shdn”
		(no shut-off).
START		3. Press START to activate the
		no shut-off and leave the
		control set in this special
		features mode.

Cook and Hold

Your new control has a cook and hold feature that keeps cooked foods warm for up to 3 hours after the cooking function is finished. To activate this feature, follow the steps below.

1.Press BAKE and BROIL at the

BAKE	B R O I L	same time for 2 seconds until
		the display shows “SF.”

C O O K I N G	2. Press COOKING TIME. The
	display will show “Hld OFF.”
T I M E
	—Press COOKING TIME again
	to activate the feature. The
	display will show “Hld ON.”
START	3. Press START to activate the
	cook and hold feature and
	leave the control set in this
	special features mode.

12 Hour, 24 Hour or Clock Black-Out

Your control is set to use a 12 hour clock. If you would prefer to have a 24 hour military time clock or black-out the clock display, follow the steps below.

		1. Press BAKE and BROIL at the same time for 2
BAKE	B R O I L	seconds until the display shows “SF.”

2.Press CLOCK once. The display will show “12 hr.”

CLOCK	—Press CLOCK again to change to the 24 hour
	military time clock. The display will show “24 hr.”

	—Press CLOCK again to black-out the clock display.
	The display will show “OFF.”
START	3. Press START to activate your choice and leave the
	control set in this special features mode.

NOTE: If the clock is in the black-out mode you will not be able to use the Delay Start function.

(continued next page)

11