OVEN CONTROL, CLOCK AND TIMER
(continued)
The control has a series of tones that will sound at different times. These tones may sound while you set the control for an oven function or at the end of the oven function. They will also alert you when an incorrect time or temperature has been entered or if there is a problem with the oven.
Tones While Setting the Control
When you press a touch pad you will hear a beep. This beep will let you know you have placed enough pressure on the pad to activate it.
Preheat Notification Tone
When you set an oven temperature the oven automatically starts to heat. When the temperature inside the oven reaches your set temperature a tone will sound to let you know to place the food in the oven.
Attention Tone
This tone will sound if you set an invalid function or try to set an additional function. The tone can be quickly identified by watching the display messages.
SPECIAL FEATURES OF YOUR OVEN CONTROL
Your new touch pad control has additional features that you may choose to use. The following are the features and how you may activate them. The special feature modes can only be activated while the display is showing the time of day clock.
They remain in the control’s memory until the steps are repeated. When the display shows your choice press START. The special features will remain in memory after a power failure.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound followed by one beep every 6 seconds, until CLEAR/OFF is pressed. This continuous 6 second beep may be canceled.
To cancel the 6 second beep:
1.Press BAKE and BROIL at the
BAKE | B R O I L | same time for 2 seconds until |
|
| the display shows “SF.” |
KITCHEN
TIMER
ON/OFF
START
2.Press KITCHEN TIMER ON/OFF. The display shows “CON BEEP” (continuous beep). Press KITCHEN TIMER ON/OFF again. The display shows “BEEP.” (This cancels the one beep every 6 seconds.)
3.Press START.
10