How to Set Delay Start of Cleaning
Easy Steps:
D E L A Y
4. Press DELAY START.
1.Press SELF CLEAN.
2.Press the number pads to set the clean time.
3.Press DELAY START.
4.Press the number pads to set the start time.
5.Press START.
Delay Start is setting the oven to start the clean cycle automatically at a later time than the present time of day.
NOTE: Before beginning, make sure the oven clock shows the correct time of day.
1. Follow the steps in the Before a Clean Cycle section.
S T A R T
5.Press the number pads to set the time of day you want the clean cycle to start.
6.Press START.
START
The door locks automatically. The display will show the start time. It will not be possible to open the oven door until the temperature drops below the lock temperature and the LOCKED DOOR light goes off.
7.When the LOCKED DOOR light is off, open the door.
S E L F
2. Press SELF CLEAN.
C L E A N
3.Press the number pads to set the clean time.
After Self-Cleaning
You may notice some white ash in the oven. Just wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a
NOTE:
•No functions can be programmed before the door automatically unlocks.
•If the shelves have become hard to slide, wipe the shelf supports with cooking oil.
If the oven is not clean after one clean cycle, repeat the cycle.
(continued next page)
35