Miele KM 326G manual Cleaning and maintenance, Tab Indentation

Page 10

Cleaning and maintenance

Before cleaning, be certain the burners are

turned off and the grates are cool.

In the event of boiling over, clean immediately, to prevent the substance which has boiled over from igniting.

Wiping the hob down regularly immediately after use prevents dirt from burning on and resulting in stains which are difficult to remove.

For cleaning, use a mixture of water and detergent or all-purpose cleaner.

Stubborn stains on the appliance can be removed with a non-abrasive cream or a soft sponge.

tab

indentation

2-zone high-speed wok burner

tab

indentation

Super high-speed burner/ high-speed burner

The burners can be taken apart for cleaning and put back together as the diagram shows.

Do not submerge hot burner caps in cold water. The quick change in temperature may damage the enamel.

Important:

The burners must only be lit when they are correctly fitted together, otherwise the ignition device could be damaged.

Avoid using too much water when cleaning the burners. Do not use scouring powder or other aggressive cleaning agents.

Keep the appliance and vicinity clear and free from combustible materials, gasoline and other flammable vapors and liquids.

From time to time, the electrodes should be wiped with a well wrung-out cloth and dried with a clean cloth.

8

Image 10

Contents T . n r 2 2 9 2 0 / T 9 1 7 0 1 B Mode demploi du kit de conversion AH 102 C4U English FrançaisPage Control knobs with marking Safety control Burner ringGeneral Marking Burner capPage Important notes for the user AdviceBefore starting check High-speed and super high-speed burners Lighting and adjustingGas burners Zone super high-speed wok burner Outer ringMake sure the trivet is securely fixed to the pot support How to use gas burnersPlace the pot over the pot support fitted above the hob ˝ 50 mm between the pot and a heat-sensitive worktopAre best done on the super high-speed wok Burner Cooking in comfortMaking sauces Keeping food hot Cooking through/simmering Cleaning and maintenance Tab IndentationCont Appliance Ignition sparks but burner TroubleshootingProblem Cause Solution Burner does not burn well Does not igniteElectrical circuit diagram Electrical connection This appliance must be groundedFor USA only Gas pressures for USAGas pressures for Canada For Canada onlyNominal rating natural gas 4˝ Building-in dimensions Clearance above and around the appliance Wall strips must be heat-resistantAir inlets at the back of the hob are clear Building-inPlace the hob in the cut-out. Check that Secure the hob in position. The bracketsPage Part Safety InstructionsConversion kit Type number AH 102 C4U Conversion instructionsFor future use DisassemblyConversion instructions IgniterPurposes. Check gas pressure. Permitted Locations of injectors and minimum adjustment screwsPressure regulator conversion High speed and super high speed burner ConversionHand side of the wok burner body a Wok burner outer ring conversionWok burner inner ring conversion WayTwo 12 mm wrenches are needed to separate the fittings Reference tableAssembly Minimum adjustment screwsThis concludes conversion. The hob can now be reassembled Installing appliance Testing converted applianceWarranty and service Energy source Technical detailsModel number KM 326G Gas source Overall wattage, electricity Total burnerrate Natural gasPage