Miele Technical details, Model number KM 326G Gas source, Energy source, Liquid propane gas

Page 29

Technical details

Model number:

 

KM 326G

Gas source:

see identification plate

Energy source:

 

120 V - 60 Hz

Overall wattage, electricity:

3 VA

Total burnerrate

 

 

Natural gas

56400 Btu/hr (16.2 kW)

Liquid propane gas

43600 Btu/hr (12.78 kW)

This appliance with the orifices as delivered for natural gas or LP gas by the manufacturer is suitable for use till 2000 feet. By installation above 2000 feet contact your distributor or Miele USA/Canada and ask for a replacement set with orifices suitable for your altitude.

Change the orifices as written in the instructions of the manual.

.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents T . n r 2 2 9 2 0 / T 9 1 7 0 1 B English Français Mode demploi du kit de conversion AH 102 C4UPage General Marking Safety control Burner ringControl knobs with marking Burner capPage Before starting check AdviceImportant notes for the user Gas burners Lighting and adjustingHigh-speed and super high-speed burners Zone super high-speed wok burner Outer ringPlace the pot over the pot support fitted above the hob How to use gas burnersMake sure the trivet is securely fixed to the pot support ˝ 50 mm between the pot and a heat-sensitive worktopMaking sauces Keeping food hot Cooking through/simmering Cooking in comfortAre best done on the super high-speed wok Burner Tab Indentation Cleaning and maintenanceCont Appliance Problem Cause Solution Burner does not burn well TroubleshootingIgnition sparks but burner Does not igniteElectrical circuit diagram This appliance must be grounded Electrical connectionGas pressures for USA For USA onlyNominal rating natural gas 4˝ For Canada onlyGas pressures for Canada Building-in dimensions Wall strips must be heat-resistant Clearance above and around the appliancePlace the hob in the cut-out. Check that Building-inAir inlets at the back of the hob are clear Secure the hob in position. The bracketsPage Conversion kit Type number AH 102 C4U Safety InstructionsPart Conversion instructionsConversion instructions DisassemblyFor future use IgniterPressure regulator conversion Locations of injectors and minimum adjustment screwsPurposes. Check gas pressure. Permitted High speed and super high speed burner ConversionWok burner inner ring conversion Wok burner outer ring conversionHand side of the wok burner body a WayReference table Two 12 mm wrenches are needed to separate the fittingsThis concludes conversion. The hob can now be reassembled Minimum adjustment screwsAssembly Testing converted appliance Installing applianceWarranty and service Model number KM 326G Gas source Technical detailsEnergy source Overall wattage, electricity Total burnerrate Natural gasPage
Top Page Image Contents