Correcting minor faults
Installation, maintenance and re- pairs to the electrical components of this appliance should only be car- ried out by a suitably qualified and competent person in accordance with local and national safety regula- tions. Repairs and other work by un- qualified persons could be dan- gerous. The manufacturer cannot be held responsible for unauth- orised work.
Some minor problems however can be dealt with as follows:
What to do if . . .
.. . the hob cooking zones / hot- plates do not warm up after being switched on.
Check whether,
the mains fuse has blown. Contact a qualified electrician or the Miele Ser- vice Department.
. . . the oven does not heat up.
Check whether,
the selector switch is set to the func- tion required, and the temperature control is set at the correct tempera- ture.
"AUTO" is lit up in the timer display field.
To switch on the oven independently of the timer, "@" should show in the display. Press the "i" button.
the mains fuse has blown. Contact a qualified electrician or the Miele Ser- vice Department.
.. . the heating works, but not the oven lighting.
The bulb needs changing:
Disconnect the appliance from the electricity supply:
Switch off at the isolator or the mains fuse box.
Unscrew the light cover and the seal.
Change the bulb:
Screw the light cover and the seal back on again.
Reassemble in the reverse order, care- fully ensuring all parts are correctly in place.
58