Miele H 316, H 326, H 320, H 310 manual Installation Hobs with enclosed hotplates, Building-in KM

Installation - Hobs with enclosed hotplates

When installing a hob there may be a	Building-in KM 200
wall at the back and a wall or tall unit at
one side. On the other side there must
not be a unit or wall which stands
higher than the hob.

Because of the heat given off, there must be a minimum distance as fol- lows:

–50 mm between the worktop cut-out and adjacent furniture, e. g. tall unit.

–50 mm between the back wall and the worktop cut-out.

–Maintain the safety distance between the hob and a cooker hood above it as recommended the manufacturer. Where no figures are given, e.g. for a pot or utensil hanging rail, the safety distance must be at least 760 mm for inflammable objects.

* building-in height

Prepare the worktop cut-out as illustrated.

1	2
	3
4	5

bSealing ring c Hob

d Worktop e Clamps f Screw

Loosen the screws f.

Set the hob unit c into the cut-out and centre it.

Turn the screws f to the right, until the clamps e are firmly attached to the worktop d.

Check that the hob unit c fits tightly on to the worktop.

73