Vulcan-Hart 2XG6BDF, ML-136654, 4G4BDF Turning on the Fryer, Turning OFF the Fryer, Start Button

Page 13

GBD_GBDF SERIES GAS FRYERS

Solid State Knob Control

Temperature Knob Control

Melt Switch

Power Switch

Filter Switch

 

(for those models with KleenScreen PLUS®

 

Filter Systems)

Start Button

 

TURNING ON THE FRYER

ŠOpen the door to the fryer. Select Liquid or Solid Shortening pressing the switch to the desired selection.

ŠSet temperature by turning the knob to the desired temperature.

ŠPress the power switch to the ON position. The burners will not light until the next step is completed.

ŠPress the START switch once for the burners to light. The START switch is a momentary switch and will reset after being pressed.

ŠThe burners will cycle on and off throughout the melt cycle. When the fry tank oil reaches 135° F the burners will stop cycling and remain on until the set temperature is reached. Once set temperature is reached the burners will cycle on and off to maintaining the set temperature.

TURNING OFF THE FRYER

ŠOpen the door to the fryer. Press the power switch to the OFF position.

VULCAN-HART

F-32934 Rev. B (June 2008)

-13-

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation & Operational Manual Important for Your Safety Table of Contents Ordering Parts IntroductionUnpacking GeneralFryer Model No Device Serial No InstallationClearances Codes and StandardsLocation United StatesFlue Connection AssemblyCanada GAS Connection Testing the GAS Supply Piping SystemGAS Pressures ALL Models Fryers with CastersElectrical Connection Cleaning OVER-TEMPERATURE ShutdownLeveling the Fryer OperationBasic Frying Instruction Filling Tank with ShorteningFry Basket Guidelines Extending Shortening LifeFry Basket Capacity Turning OFF the Fryer Turning on the FryerStart Button Filtering the OIL Extended ShutdownWeekly or when oil is replaced Boil OUT ProcedureDraining the Tank Cleaning GAS KleenScreen Plus Models Filtering Instructions for KleenScreen Plus Fryers Same Suction Tube Step Do not Wash Fabric EnvelopeOperation Filtering ProcedureQuick Start Guide for Solid State Knob Controls Filtering in 6 Easy Steps Removing Excess Debris from the Screen Filter Filtering TIPFlush and Discard Thermal Overload Protection Button Boil OUT ProcedureService in the US and Canada MaintenanceFlue Vent Inspection Australia
Top Page Image Contents