GBD_GBDF SERIES GAS FRYERS
INTRODUCTION
GENERAL
Vulcan Fryers are produced with quality workmanship and material. Proper installation, usage and maintenance will result in years of satisfactory performance.
Before installing the fryer, thoroughly read this manual and carefully follow all instruction.
This manual is applicable to model listed on the cover page. Procedures in this manual will apply to all models unless specified. Pictures and illustrations can be of any model unless the picture or illustration needs to be model specific.
ORDERING PARTS
Customers may order parts directly from their local authorized service center. If not known, call Vulcan Customer Service at
To speed up your order, provide the model number, serial number, gas type, part needed, item part number (if known) and quantity needed.
FRYER CAPACITY
MODEL - | # of Heat Tubes | BTU / Hour | Width Inch (cm) | Shortening lbs. (kg) |
GMO | Each Fry Tank | Each Fry Tank | Total System | Each Fry Tank |
1G4BD | 4 | 120,000 | 15.5" (39) | |
1G6BD | 5 | 150,000 | 21.0" (53) | |
1G8BD | 5 | 150,000 | 21.0" (53) | |
2G4BDF | 4 | 120,000 | 31.0" (79) | |
3G4BDF | 4 | 120,000 | 46.5" (118) | |
4G4BDF | 4 | 120,000 | 62.0" (158) | |
2G6BDF | 5 | 150,000 | 42.0" (107) | |
3G6BDF | 5 | 150,000 | 63.0" (160) | |
4G6BDF | 5 | 150,000 | 84.0" (214) | |
2G8BDF | 5 | 150,000 | 42.0" (107) | |
3G8BDF | 5 | 150,000 | 63.0" (160) | |
4G8BDF | 5 | 150,000 | 84.0" (214) | |
2XG4BDF | 4 | 120,000 | 31.0" (79) | |
2XG6BDF | 5 | 150,000 | 42.0" (107) | |
2XG8BDF | 5 | 150,000 | 42.0" (107) |
UNPACKING
This fryer was carefully inspected before leaving the factory. Upon acceptance of the shipment, the transportation company assumes full responsibility for safe delivery.
Immediately after unpacking the fryer, check for possible shipping damage. If the fryer is damaged, save the packaging material and contact the carrier within 15 days of delivery.