Vulcan-Hart 2G4BDF, ML-136654, ML-136656, ML-136657 Quick Start Guide for Solid State Knob Controls

Page 22

GBD_GBDF SERIES GAS FRYERS

Quick Start Guide for Solid State Knob Controls:

Start up in 4 Easy Steps:

Step 1:

Fill fry tank with oil and then turn on the power.

Step 2:

Set temperature knob to the desired set temperature.

Step 3:

Move the MELT switch to the correct shortening being used: Solid or Liquid.

Step 4:

Press the START switch and fryer will begin to heat. The burners will cycle on and off through the melt cycle. When temperature reaches 135° F the burner will stay on until set temperature is reached.

VULCAN-HART

F-32934 Rev. B (June 2008)

-22-

Image 22

Contents Installation & Operational Manual Important for Your Safety Table of Contents Unpacking IntroductionOrdering Parts GeneralInstallation Fryer Model No Device Serial NoLocation Codes and StandardsClearances United StatesFlue Connection AssemblyCanada GAS Pressures ALL Models Testing the GAS Supply Piping SystemGAS Connection Fryers with CastersElectrical Connection Leveling the Fryer OVER-TEMPERATURE ShutdownCleaning OperationFilling Tank with Shortening Basic Frying InstructionFry Basket Guidelines Extending Shortening LifeFry Basket Capacity Turning OFF the Fryer Turning on the FryerStart Button Extended Shutdown Filtering the OILWeekly or when oil is replaced Boil OUT ProcedureDraining the Tank Cleaning GAS KleenScreen Plus Models Filtering Instructions for KleenScreen Plus Fryers Same Suction Tube Do not Wash Fabric Envelope StepFiltering Procedure OperationQuick Start Guide for Solid State Knob Controls Filtering in 6 Easy Steps Removing Excess Debris from the Screen Filter Filtering TIPFlush and Discard Boil OUT Procedure Thermal Overload Protection ButtonFlue Vent Inspection MaintenanceService in the US and Canada Australia