Vulcan-Hart ML-136657, ML-136654, ML-136656, ML-136681, ML-136651, 4G4BDF Important for Your Safety

Page 2

GBD_GBDF SERIES GAS FRYERS

IMPORTANT FOR YOUR SAFETY

THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL.

POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE OBTAINED FROM THE LOCAL GAS SUPPLIER.

IMPORTANT

IN THE EVENT A GAS ODOR IS DETECTED, SHUT DOWN UNITS AT THE MAIN SHUTOFF VALVE AND CONTACT THE LOCAL GAS COMPANY OR GAS SUPPLIER FOR SERVICE.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.

VULCAN-HART

F-32934 Rev. B (June 2008)

-2-

Image 2

Contents Installation & Operational Manual Important for Your Safety Table of Contents Unpacking IntroductionOrdering Parts GeneralInstallation Fryer Model No Device Serial NoLocation Codes and StandardsClearances United StatesCanada AssemblyFlue Connection GAS Pressures ALL Models Testing the GAS Supply Piping SystemGAS Connection Fryers with CastersElectrical Connection Leveling the Fryer OVER-TEMPERATURE ShutdownCleaning OperationFilling Tank with Shortening Basic Frying InstructionFry Basket Capacity Extending Shortening LifeFry Basket Guidelines Start Button Turning on the FryerTurning OFF the Fryer Extended Shutdown Filtering the OILDraining the Tank Boil OUT ProcedureWeekly or when oil is replaced Cleaning GAS KleenScreen Plus Models Filtering Instructions for KleenScreen Plus Fryers Same Suction Tube Do not Wash Fabric Envelope StepFiltering Procedure OperationQuick Start Guide for Solid State Knob Controls Filtering in 6 Easy Steps Flush and Discard Filtering TIPRemoving Excess Debris from the Screen Filter Boil OUT Procedure Thermal Overload Protection ButtonFlue Vent Inspection MaintenanceService in the US and Canada Australia