IMPORTANT SAFETY INSTRUCTIONS
Use only the turntable and the roller stay designed for this oven.
To prevent the turntable from breaking:
(a)Before cleaning the turntable with water, leave the turntable to cool.
(b)Do not put hot foods or hot utensils on a cold turntable.
(c)Do not put cold foods or cold utensils on a hot turntable.
Do not place anything on the outer cabinet during operation.
NOTE:
If you are unsure how to connect your oven, please consult an authorised, qualified electrician. Neither the manufacturer nor the dealer can accept any liability for damage to the oven or personal injury resulting from failure to observe the correct electrical connection procedure.
Water vapour or drops may occasionally form on the oven walls or around the door seals and sealing surfaces. This is a normal occurrence and is not an indication of microwave leakage or a malfunction.
INSTALLATION
1.Remove all packing materials from the inside of the oven cavity. Discard the loose polythene sheet from between the door and cavity. Remove the feature sticker, if attached, from the outside of the oven door.
Do not remove the protective film attached to the inside of the door
2 3
14
5
6
7
08
9
✓ ✗
2.Check the oven carefully for any signs of damage.
BEFORE OPERATION
3.Place the oven on a flat, level surface strong enough to support the oven’s weight plus the heaviest item likely to be cooked.
4.Ensure there is a minimum free space above the oven of 19.5 cm.
19.5cm
5.Securely connect the plug of the oven to a standard earthed (grounded) household electrical outlet.
Plug in the oven. | 1. | |
1. The oven display will flash: | ||
|
2.Press the STOP key, the display will show:
2.
To set the clock, see page 7. | x1 |
6