Cleveland Range (T) MKDL-40-T (-CC), (T) MKDL-125-T (-CC), (T) MKDL-100-T (-CC) manual Speed Control

SWITCH

CONFIGURATION

For Cook Chill Direct Steam Mixer Kettles

INDEX

Capacitor Contactor Cartridges

PART NO.

KE52074 KE603208-9 KE603208-8

NOTES: *For units built prior to December 2006, the complete switch assembly must be ordered (see applicable drawing).

Refer to Maintenance Section for Switch Disassembly Instructions.

	SPEED CONTROL
		5	LI
	6	4
			F
	7		T
			3
	8		2
	9		1
	FAST		MIN.
	MOTOR WILL NOT START
	UNLESS CONTROL IS AT "MIN."
	MIXER		LIFT
	OFF		OFF
MIX	LIFT		UP	DOWN
			EMPTY	EMPTY
	EMERGENCY
		STOP
				KE95230-C

MAIN POWER			CONTROLLER					WATER METER
			OFF	OFF			INTERRUPT	START	START
	OFF	ON	HEAT AUTO COOL	HEAT AUTO COOL	BYPASS	ACTIVE		CONTINUE RESET	OFF	ON
EMPTY	EMPTY	EMPTY			EMPTY EMPTY	EMPTY	EMPTY EMPTY EMPTY	EMPTY	EMPTY	EMPTY	EMPTY

OFF ON General Operation

1.Turn MAIN POWER SWITCH to "ON".

MIX OFF LIFT Lifting & Lowering

Bridge

1.Turn MIX/LIFT SWITCH to "LIFT".

SPEED CONTROL		2.	Turn MIXER SPEED CONTROL to
	LIFT
			"MIN" and adjust to desired speed.
		3.	Turn and hold UP/DOWN SWITCH
	OFF		"UP" to raise or "DOWN" to lower.
UP	DOWN

BYPASS ACTIVE

OFF

HEAT AUTO COOL

Manual Heating/ Cooling

1.Turn ACTIVE/BYPASS SWITCH to "BYPASS".

2.Turn CONTROLLER SWITCH to "HEAT" or "COOL".

3.For heat: open STEAM VALVE completely to boil, or adjust to regulate temperature.

For cool: open STEAM VALVE completely.

WARNING- Insure FAUCET SPOUT is out of way before raising or lower-

ing bridge.

MIX OFF LIFT Mixing

HEAT AUTO COOL	Automatic Heating/
OFF
	Cooling
	NOTE: TEMPERATURE PROBE on	OFF ON Water Meter	Discharge Valve
BYPASS ACTIVE	MIXER BRIDGE must be covered