OPERATING INSTRUCTIONS
Operating Controls & Indicators for Standard Direct Steam Mixer Kettles
ITEM NO. | DESCRIPTION FUNCTION |
|
1. | Air Quick Connect | Connection for air to food pump. |
2. | Air Regulator | Opens and closes air operated product discharge valve (Item 10). |
3. | Hand Wheel | Tilts kettle for pouring. May be replaced by tilt switch if unit is power tilt. |
4. | Steam Valve | Manually controls the amount of steam entering the kettle. |
5. | Scraper Blades | Scrapes the side of the kettle and moves product away. |
6. | Main Agitator Arm | Provides most of the product movement. |
7. | Temperature Probe | Probe holds temperature sensors for controller. |
8. | Secondary Arm | Provides reverse agitation and product lift in kettle. |
9. | Drain Cock | Used to manually drain condensate from kettle. |
10.Product Discharge Valve . . . .Discharge valve for product in the kettle.
11.Mixer Bridge . . . . . . . . . . . . . .Encloses agitator motors.
12.Secondary Speed Control . . .Controls speed of secondary agitator arm.
13. | Faucet Spout | .Delivers water to the kettle. |
14. | Hot Water Valve | .Turns on hot water. |
15. | Cold Water Valve | .Turns on cold water. |
16. | Mixer Speed Control | .Controls speed of agitators and mixer bridge lift mode. |
17. | Mix/Lift Switch | .Sets hydraulics to mix or lift mode. |
18. | Up/Down Switch | .When unit is in lift mode, bridge can be raised or lowered with this switch. |
19. | Emergency Stop | .Stops hydraulic system. |
20. | On/Off Switch | .Power switch to water meter. |
21. | Start Switch | .Starts water flow to kettle. |
22. | Interrupt Switch | .Interrupts flow without resetting water meter. |
23. | Active/Bypass Switch | .Switch to activate or bypass (manual operation) the controller. |
24. | Controller Switch | .Dual function switch for auto mode or manual heat, cool or off mode. |
25. | Main Power Switch | .Power switch for unit. |
26. | Water Meter Control | .Display and setting for water meter. |