INSTALLATION
GENERAL
Installation of the kettle must be accomplished by qualified installation personnel working to all applicable local and national codes. Improper installation of product could cause injury or damage.
This unit is built to comply with applicable standards for manufacturers. Included among those approval agencies are: UL, NSF, ASME/Ntl.Bd., CSA, ETL, CE, and others. Many local codes exist, and it is the responsibility of the owner/installer to comply with these codes.
INSPECTION
Before uncrating, visually inspect the unit for evidence of damage during shipping. If damage is noticed, do not unpack the unit, follow shipping damage instructions.
SHIPPING DAMAGE
INSTRUCTIONS
If shipping damage to the unit is discovered or suspected, observe the following guidelines in preparing a shipping damage claim.
1.Write down a description of the damage or the reason for suspecting damage as soon as it is discovered. This will help in filling out the claim forms later. If possible, take a polaroid picture.
2.As soon as damage is discovered or suspected, notify the carrier that delivered the shipment.
3.Arrange for the carrier's representative to examine the damage.
4.Fill out all carrier claims forms and have the examining carrier sign and date each form.
CLEARANCE REQUIREMENTS
This unit must be installed in accordance with the clearances shown on the rating label which is adhered to the unit.
FOR YOUR SAFETY. Keep the appliance area free and clear of combustible materials.
RECOMMENDED FLOOR DRAIN LOCATION
WALL |
|
|
|
|
18" CLEARANCE REQUIRED FOR SERVICE |
|
| ||
A |
|
|
| |
VALVE |
|
|
| |
6" |
|
|
|
|
B | 12" |
|
|
|
|
|
|
| |
12" |
|
|
|
|
| C |
|
|
|
|
| A | B | C |
(T) | 22 1/8" | 51" | 31" | |
(T) | 22 1/8" | 53" | 31" | |
(T) | 22 1/8" | 58" | 31" | |
(T) | 21 3/4" | 61" | 31" | |
(T) | 21 3/4" | 65" | 31" | |
(T) | 21 3/4" | 68" | 31" | |
Recommended Floor Drain Location