i n s t a l l a t i o n
mobile equipment restraint
Any appliance that is not furnished with a power supply cord but includes a set of casters must be installed with a tether. Adequate means must be provided to limit the movement of this appliance without depending on or transmitting stress to the electrical conduit. The following requirements apply:
1.Casters must be a maximum height of 6" (152mm).
2.Two of the casters must be the locking type.
3.Such mobile appliances or appliances on mobile stands must be installed with the use of a flexible connector secured to the building structure.
A mounting connector for a restraining device is located on the lower back flange of the appliance chassis or on an oven stand, approximately
18" (457mm) from the floor. A flexible connector is not supplied by nor is it available from the factory.
warning
risk of electric shock.
Appliance must be secured
to building structure.
CombiTherm® ES series • electric INSTALLATION MANUAL