Alto-Shaam 1220 manual Water Valve, Water drainage

Page 30

i n s t a l l a t i o n

water Valve

shut-off valve shown in the off position

NOTE:

The shut-off valve

must be in the OPEN position when the oven is being used.

water drainage

The oven must discharge through an indirect waste pipe by means of an air gap. The drain fitting is supplied with a 1-1/2-inch (41mm) NPT thread.

Aunion is required. Install a 1-1/2-inch (41mm) diameter connection, drain line and clamp into place. The drain line must always be a positive gradient away from the Combitherm oven and not more than 12-inches (305mm) before an air gap.

NOTE: In the U.S.A., this equipment is to be installed to comply with the Basic Plumbing Code of the Building Officials and Code Administrators International, Inc. [BOCA], and the Food Service Sanitation Manual of the Food & Drug Administration [FDA].

2" (51mm)

Air Gap

If several units are to be connected to one drain pipe, the dimensions of the pipe must be sufficient to allow an unobstructed water drain system.

1-1/2" (41mm) diameter connection required

1-1/2" (41mm) diameter NPT at back of oven

WASTE PIPE 1-1/2" to 2" minimum diameter (c. 38mm to 51mm)

Condensate Pan Clean Out

CombiTherm® ES series • electric INSTALLATION MANUAL #MN-28897 • 28.

Image 30
Contents ES electric Installation L i v e r y P a c k i n gSafety procedures and precautions N g e rSite Installation Installation codes & StandardsVentilation requirements Positioning on site Minimum Clearance RequirementsLifting Instructions Positioning requirements Accessories Combitherm Cleaning Liquid CE-24750610es 610ES Touch610ES 610esi 610ESi Touch610ESi 610esiN 610ESiN Touch610ESiN 1010es 1010ES Touch1010ES 1010esi 1010ESi Touch1010ESi 1010esiN 35-7/8 910mm Water Drain 33-7/8 860mm Rear714es 714ES Touch714ES 714esi 714ESi Touch714ESi 1018es Water supply shut-off valve and back-flow preventer1018esi 1018esi 1018esi/sk1220es Back 1151mm1220esi 106mm2020es 60-1/4 x 26-1/4 x 32-11/16 1530mm x 667mm x 830mm2020esi 2020esi 2020esi/skHard wired models Electrical connectionTerminal Block Ground Electrical Connection Following Electrical Connection Mobile equipment restraint Risk of electric shockWater quality requirement Water connections Water requirements Two 2 cold water inlets drinking qualityWater Valve Water drainageE c k l i s t ClearancesWiring or connection issue Faulty or scaled water level probeFaulty or plugged solenoid valve assembly Incorrect power to the unitFaulty B-4 probe Problem with water level probeConnection issue with B-4 probe Connection issue at B-3 probePlugged or faulty Y-1 solenoid Temperature sensor shorted to ground/faultyFaulty drain pump Connection issue at X-3 personality jumperTo 284F Oven Probe FaultBypass Probe Fault Excess Oven TempVentless hood option Condensate drainVentless Hood Power Knob OperationOriginal equipment limited warranty TRansportation damage and claims
Related manuals
Manual 41 pages 12.09 Kb

1220 specifications

Alto-Shaam is known for its innovative cooking and holding equipment designed for the foodservice industry, and their VHes product line is no exception. This range includes models VHes-10, VHes-5, 1220, 610, and 714, each built with unique features and advanced technologies to meet the demands of modern kitchens.

The VHes-10 and VHes-5 models are equipped with Alto-Shaam’s exclusive Halo Heat technology, which provides precise temperature control and ensures even heat distribution. This technology gently holds food at the perfect serving temperature without drying it out, enhancing both flavor and texture. These models also feature Energy Star certification, reflecting their energy-efficient design, which helps kitchens reduce operational costs while supporting sustainability goals.

The VHes-10 boasts a larger capacity, capable of accommodating more food items, while the VHes-5 is designed for smaller operations or limited spaces, providing versatility in the kitchen. Both models come with digital control panels for easy temperature adjustments and monitoring, ensuring that chefs can maintain optimal conditions at all times.

Moving on to the 1220, 610, and 714 models, these units cater to diverse holding needs within foodservice operations. Each model is designed to be user-friendly, with clear digital displays and intuitive controls that allow chefs to quickly set and adjust holding temperatures. The 1220 model is particularly popular for its spacious design, which supports larger quantities of food, making it ideal for bustling kitchens and catered events.

The 610 and 714 models are engineered for flexibility, allowing operators to effectively manage their food items in various settings. Their compact sizes combined with smart technology make them an excellent choice for both front-line service environments and back-of-house operations. Notably, all these models support multiple food types, enabling establishments to hold everything from vegetables to protein dishes without compromising quality.

In summary, Alto-Shaam’s VHes series, including the VHes-10, VHes-5, 1220, 610, and 714, integrates cutting-edge technologies such as Halo Heat and efficient designs into versatile equipment. With an emphasis on energy savings, precise temperature control, and user convenience, these models are vital for any foodservice operation seeking to elevate their food holding and serving capabilities.