Sierra Monitor Corporation HRG010-W, HRG015-W Hazard Warning Label, Classification of risks

Page 10

HRX-OM-J049-A

Chapter 1 Safety Instructions

1.3 Hazard Warning Label

The hazard warning labels indicate where potential hazards are present during unit operation and maintenance.

The hazard warning labels are in appropriate sizes and colors. They contain symbols in addition to the descriptions of warnings.

1.3.1Classification of risks

„High voltage hazards

The unit is operated at high voltage and may cause an electrical shock. The

attached label contains the symbol

.

Only operate the unit with the cover panel attached.

The unit contains the power supply carrying high voltage inside that is isolated with the cover panel.

Only trained personnel are allowed to work, including unit inspection, around the power supply.

„High temperature hazards

The unit reaches high temperature during operation and may cause burns when

an operator comes in contact. The attached label contains the symbol .

There is the presence of the surface in the unit that is at high temperatures during operation. Potential burns may occur if touched. Residual heat may cause burns despite the power being turned OFF. Be sure of the surface reaching room temperature before work.

„Rotating object hazards

The unit includes several parts that rotate during operation and may cause the operator to get the finger caught in these parts. The attached label contains the

symbol .

The unit contains a section which rotates when it is in action. Potential personal injury may occur if touched. A rotator is structured to come to a temporary stop and resume rotation.

Avoid performing work during system operation.

1.3 Hazard Warning Label

HRG010-W HRG015-W

1-4

1st edition : Aug. 2006

Rev. A: May. 2007

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Water-refrigerated Thermo cooler To the Customers Table of Contents Startup and Shutdown Error Message and TroubleshootingChapter Unit Maintenance Chapter DocumentsTOC-3 TOC-4 Safety Instructions Before Using this Unit„ Serious injury Level of riskDefinitions of Serious injury and Minor injury „ Minor injurySymbols Classification of risks „ High temperature hazardsHazard Warning Label „ High voltage hazardsType of hazard warning labels Model label Location of hazard warning labelSafety Measures Safety Precautions„ For handling circulating fluid „ For system transportation, installation and removalProtective equipment „ For system operationEmergency Measures Thermo Cooler OFFRecovery of refrigerant and compressor oil Disposition of WasteCirculating fluid disposal Material Safety Data Sheet MsdsSystem disposal Safety Instructions Appearance and Each Section AppearanceName of Each Section 1 HRG010-W2 HRG015-W Name of Each Section HRG015-WControl panel Name FunctionTransport and Installation TransportTransporting with forklift and unit lifting Forklift Insertion Position and Unit LiftingTransporting with caster „ HRG010-W-A / HRG015-W-A caster-mounted optionInstallation Installation conditionsInstallation location Installation location and maintenance work area Recommended Installation LocationInstallation „ Procedure for InstallationHRG010-W-A / HRG015-W-A Caster-mounted Option „ Power supply cable and Gfci breaker Electrical wiringHRG010-W HRG015-W „ How to conduct wiring Removal of Front Panel„ Electrical wiring diagram HRG015-WSpecifications 11 Communication Cable WiringPiping „ How to install piping„ Pipe diameter Name Size HRG010-W HRG015-W „ Recommended piping installationName Qty Supply of circulating fluid Open the supply valve laid with pipesReinstallation of unit „ Disconnection of power supply cableStartup and Shutdown Pre-checkSetting of circulating fluid temperature Power supplyPreparation for startup „ TS switch pump manual operation switch Additional water supplyStarting the unit Unit Startup and ShutdownStopping the unit Check at startup „ Bypass valve„ Bypass relieving valve piping set Error Message Troubleshooting Error MessageTroubleshooting See 5.3 Alarm Reset for error recoveryAlarm Reset Alarm Lamp OFF „ Error checkUndo the screws 6 pcs. to remove the front panel „ When the alarm lamp goes out by performing steps 1. to Location of Reset Switch RS Yellow ButtonRecovery from Power Failure Power Lamp on „ Power error checkUndo the screws 6 pcs. to remove the front panel Switch off the earth leakage breaker once Control of Water Quality Unit MaintenanceSubstances Facility water Circulating fluid spec Spec Inspection and Cleaning Inspection item Daily inspectionInspection method Quarterly inspection „ Replacement of circulating fluid„ Cleaning of facility water Biannual inspection„ Antifreeze of circulating fluid Check during wintertime„ Antifreeze function automatic pump operation Long-term Storage ConsumablesPart number Qty Remarks Standard Specifications DocumentsHRG010-W HRG015-W „ Gfci breaker Optional Specifications„ Caster „ CommunicationOutline Dimensions 2 HRG010-W-A, HRG015-W-AElectric Circuit 1 HRG010-W, HRG015-W2 HRG010-W-BC, HRG015-W-BC Electric Circuit HRG010-W-BC, HRG015-W-BCFlow Chart „ HRG010-W, HRG015-WThermo Cooler HRG010-W / WRG015-W Daily Inspection Sheet IN/OUTProduct Warranty

HRG015-W, HRG010-W specifications

Sierra Monitor Corporation is renowned for its innovative solutions in the field of industrial monitoring and control. Among its noteworthy offerings are the HRG010-W and HRG015-W wireless gas detectors, specifically designed to enhance safety and efficiency in various industrial environments. These devices provide critical monitoring for hazardous gases, thereby ensuring compliance with safety regulations and creating a safer workplace for employees.

One of the main features of the HRG010-W and HRG015-W models is their advanced sensor technology, which enables accurate detection of hazardous gases, including but not limited to, methane, propane, and hydrogen. This precision is crucial for industries such as oil and gas, wastewater treatment, and chemical manufacturing where the presence of these gases can pose significant risks.

Both models are equipped with powerful wireless communication capabilities. They utilize Zigbee or Wi-Fi technologies to transmit real-time data back to a centralized monitoring system. This feature facilitates instant readings and alerts, allowing for timely interventions and reducing response times during emergencies. Operators can monitor gas levels remotely, thus enhancing operational efficiency and allowing for better resource allocation.

Another important characteristic of the HRG010-W and HRG015-W is their rugged design, tailored to withstand harsh industrial conditions. The enclosures are built with durable materials that resist moisture, dust, and corrosive substances. This durability ensures longevity and reliability in the field, which is paramount for continuous gas detection applications.

Furthermore, these gas detectors are designed with user-friendly interfaces that simplify setup and operation. The built-in display provides clear numerical readings and diagnostic information, while the intuitive controls make it easy for personnel to navigate functions and settings without extensive training.

In addition, both the HRG010-W and HRG015-W models can be integrated with existing control systems and safety measures, creating a comprehensive safety net. This compatibility supports various industry standards and allows facilities to modularly expand their safety networks as needed.

Overall, Sierra Monitor Corporation's HRG010-W and HRG015-W wireless gas detectors epitomize the intersection of technology and safety in industrial environments. With their advanced detection capabilities, robust design, wireless communication, and ease of use, these devices stand out as essential tools for mitigating the risks associated with hazardous gas exposure in a variety of applications.
Top Page Image Contents