Chapter 4 Startup and Shutdown
4.3 Unit Startup and Shutdown
4.3.1Starting the unit
1. Press the [ON] switch on the control panel.
The unit starts operating and regulates the circulating fluid temperature.
The [RUN] LED and [PUMP] LED on the control panel come on.
[RUN] LED | [PUMP] LED |
[ON] switch
Fig. 4-5 Starting the Unit
4.3.2Stopping the unit
1. Press the [OFF] switch on the control panel.
The unit stops.
The [RUN] LED and [PUMP] LED on the control panel go out.
[RUN] LED | [PUMP] LED |
[OFF] switch
Fig. 4-6 Stopping the Unit
4.3 Unit Startup and Shutdown | |
1st edition : Aug. 2006 | |
Rev. A: May. 2007 |