Aiwa CSD-MD50 manual Setting the Sleep Timer

To check or change the specific items

Press the TIMER/CLOCK button repeatedly until TIMER PLAY? or TIMER REC ? appears, then press the ENTER button within 5 seconds.

Each time the ENTER button is pressed, each item is displayed.

If you want to change the specific items, press the < or ~ button or turn the MULTI JOG dial,

To cancel timer standby mode temporality

Press the TIMER/CLOCK button repeatedly until TIMER OFF ? appears, and press the ENTER button within 5 seconds,

To use the unit in timer standby mode

You can use the unit normally.

For timer play, make sure the source is correctly set before turning the unit off.

m

●If the unit is left for one minute at steps 4 to 7, the timer setting mode is canceled.

●Timer play and timer recording will not begin unless the power is turned off.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified time,

1 Press the TIMER/CLOCK button repeatedly until

SLEEP ? appears on the display.

2 Within 5 seconds, press the ENTER button.

3 Within 5 seconds, turn the MULTI JOG dial to specify the time until the power is turned off.

The time changes between 5 and 240 minutes in 5-minute steps.

Specified time

4

If you leave the unit without pressing the ENTER button, the sleep timer will be activated after 5 seconds automatically,

While the sleep timer is activated

The display brightness beco,mes darker.

To check the time remaining until the power is turned off

Press the TIM EWCLOCK button repeatedly until SLEEP ? appears, and press the ENTER button. The remaining time is displayed for 5 seconds,

To cancel the sleep timer

Select SLEEP OFF at step 3 above, then press the ENTER button.

ENGLISH 27