Crisper Cover
Style 1 - Plastic Cover
To remove and replace the crisper cover:
1.Remove the crisper(s).
2.Lift the front of the cover to remove the cover support. Then lift the cover up and slide it out.
3.Replace the cover by fitting the cover tabs into lowest cabinet slots and pushing them in. Lower the front retainers into place.
FREEZER FEATURES
Your model may have some or all of these features.
Important information to know about glass shelves and covers:
Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small,
Wire Freezer Shelf
(on somemodels)
To remove and replace a wire shelf:
1.Remove the shelf by lifting the entire shelf slightly and moving it all the way to the
2.Replace the shelf by inserting the
NOTE: The shelf should lower slightly and lock into place. If the shelf does not appear stable, make sure both ends of the shelf are inserted into the shelf supports.
Style 2 - Glass Cover
To remove and replace the crisper cover:
1.Pull the glass straight out.
2.Replace the glass by pushing it straight in.
Crisper Humidity Control (on some models)
You can control the amount of humidity in the
LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
■Fruit: Wash, let dry and store in refrigerator in plastic bag or crisper. Do not wash or hull berries until they are ready to use. Sort and keep berries in original container in crisper, or store in a loosely closed paper bag on a refrigerator shelf.
■Vegetables with skins: Place in plastic bag or plastic container and store in crisper.
HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
■Leafy vegetables: Wash in cold water, drain and trim or tear off bruised and discolored areas. Place in plastic bag or plastic container and store in crisper.
Glass Freezer Shelf
(on somemodels)
To remove and replace a glass shelf:
1.Lift the front of the shelf to raise the shelf tabs up and out of the opening in each shelf track. Slide the shelf out the rest of the way.
2.Replace the shelf by tilting the back end downward to align the back shelf tab under the track on each side of the freezer. Gently push the shelf into the freezer until the two center shelf tabs are positioned within the opening in each track. Lower the shelf to rest on the shelf tracks.
15