•Connect a tube (tube and bands for fixing not supplied, to be purchased) for discharging the fumes to the connection ring placed over the aspiration motor unit.
The other end of the tube should be connected to a device for expelling fumes on the outside of the hood in the aspiration version.
Fig. 12a-b
If you want to use the filtering version, fix deflector to flues support bracket and connect the other end of the tube to the connection ring placed on deflector. Fig. 12c
Fig. 12a | Fig. 12b | Fig. 12c |
• Connect the electricity.
• Slide the lower section of the flue down to cover the aspiration set until inserting it completely into the apposite housing over the hood. Fig. 13a
• Raise the upper flue and fix it above with 2 screws to flues support bracket.
Fig.13b
• Refit the grease filter.
Fig. 13a | Fig. 13b |
66