CLEARANCE
HOLE
Figure 8.4
The manufacturer recommends securing the lag bolt from the component bag in the center hole in the bottom plate (clearance hole). This bolt will help to prevent tipping for- ward.
Figure 8.5
Using pliers, adjust the counter screws to level the gas stove.
D. Accessories
Install approved accessories per instructions included with accessories. Refer to Section 12F for appropriate acces- sories.
WARNING
Shock or fire risk.
Use ONLY optional accessories approved for this gas stove.
•Using
•Using
•Only Hearth & Home Technologies approved accessories may be used safely.
E. Top to Rear Flue Conversion
KIT CONTENTS: Top cover (without hole); Back panel (with hole).
1.Remove the front door assembly by pulling bottom of front away from gas stove and lifting it off of the hooks on top of the gas stove. Set door aside.
ON TOP OF APPLIANCE:
2.Remove the top plate with hole and discard. (Figure 8.6)
Figure 8.6
3.Remove and retain the Allen head screws that hold the solid back panel in place (Figure 8.8). Remove and discard the solid back panel.
INNER EXTENSION COLLAR
DV ADAPTER
ALLEN HEAD
SCREWS
Figure 8.7
4.Remove the inner extension collar (Shown in Figure 8.7) and set aside.
5.Remove the four screws from the DV adapter collar (Figure 8.7). Set aside DV adapter collar and screws.
Heat & Glo • | 25 |