ENGLISH
Parental lock
•You can lock the channels that you do not want to receive or unlock the previously locked channels.
1.Tune in the channel you want to lock or unlock.
�When tuning in the previously locked channels.
①Tune in the channels to which the parental lock is applied by performing direct search or preset search only.
• Then "CODE 
" is displayed for several seconds.
②While displaying "CODE 
", input the password
•When you input the correct code, the current channel can be heard(, not be unlocked).
•If the wrong password is input, "CODE ERR(OR)" is displayed. In this case, input the password again by performing the steps ① and ②.
•When "CODE 
" disappears, repeat again from the above step ①.
2.Press and hold down the ENTER button for more than 3 seconds.
• Then "CODE 
" is displayed for several seconds.
3. While displaying "CODE 
", input the password
•When you input the correct code, the current channel is locked or unlocked.
•If the wrong password is input, "CODE ERR(OR)" is displayed. In this case, input the password again by performing the steps 2 and 3.
•When "CODE 
" disappears, repeat again fromt the above step 2.
�Notes:
•The default password is "0000".
You can change this password to new one. (For details, refer to "When selecting the EDIT LOCK CODE" on page 50.)
•You can also set the parental lock on the INPUT SETUP menu. (For details, refer to "When selecting the PARENTAL LOCK" on page 49.)
•The channels to which the parental lock is applied cannot be tuned in by performing channel search or category search.
34