Sherwood RD-7503 When CD, F.AUX, Video 1~ 3 is selected as an input source, Muting the sound

Page 22

RD-7503(A)2008.11.41:45PM페이지22

ENGLISH

When CD, F.AUX, VIDEO 1~ 3 is selected as an input source

If the AUDIO MODE is set to the mode other than "DIGITAL" for the corresponding input source on the INPUT SETUP menu, you cannot hear the sound from the selected digital input. (For details, refer to "SETTING THE INPUT SETUP" on page 45.)

4. Press the AUDIO ASSIGN button.

"AUD ~ " is displayed for several seconds.

"AUD ~ " disappears, press the AUDIO ASSIGN button again.

5. Select the desired of the digital inputs connected while displaying "AUD ~ ".

• Each time the MULTI CONTROL knob is rotated or the

CURSOR LEFT()/RIGHT() buttons are pressed, the corresponding input is selected as follows :

OPT 1(Optical 1) OPT 2

- - - COX 2 COX 1(Coaxial 1)

(No assignment)

Notes:

When the selected digital input is not connected, the digital input flickers and no sound will be heard.

The selected digital input is automatically assigned to the corresponding input source on the INPUT SETUP menu. (For details, refer to "SETTING THE INPUT SETUP" on page 45.)

The sound from the component connected to the selected digital input can be heard regardless of the selected input source.

6. Operate the selected component for playback.

When playing back the program sources with surround sound, refer to "ENJOYING SURROUND SOUND" on page 25.

7. Adjust the (overall) volume.

Muting the sound

"MUTE" flickers.

To resume the previous sound level, press it again.

Listening with headphones

Ensure that the SPEAKER button is set to off.

When listening to a DTS or Dolby Digital program source, if the headphones are plugged in and the SPEAKER button is set to off, it enters the 2CH downmix mode automatically. (For details, refer to "2CH downmix mode" on page 26.)

Note:

Be careful not to set the volume too high when using headphones.

22

Image 22
Contents RD-7503 Important Safety Instructions Read this Before Operating Your Unit Introduction120 Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connection *1 Connecting Audio ComponentsComponent video input default settings *2 Copyright protection systemConnecting Digital INS and OUT Connecting External INSDigital input default settings Surround back speakers Connecting SpeakersFront Bi-Amp Connections Speaker placement Connecting Subwoofer PRE OUTConnecting Room 2 Outs Connecting DC Trigger OUTAC Input Cord Connecting for System ControlConnecting Sirius Connector only for North America SiriusConnect Home TunerRemote Sensor Front Panel ControlsFluorescent Display Bluetooth in Connector Setup MIC JackFront AUX in Jack UP/DOWN / buttons Numeric 0~9, +10 Input Selector buttons Universal Remote ControlsPower on button ENTER/SEARCH MODE, Select buttonsFunction Table of the Numbered Buttons Loading Batteries Entering a setup code Repeat the above steps 1 to 4 for each of your ComponentsRemoving a punch-through function Using a punch-through functionRemoving all punch-through functions To remove a macro program Programming a macro functionOperating a macro function To change a macro programListening to a Program Source OperationsBefore operation Listening with headphones When CD, F.AUX, Video 1~ 3 is selected as an input sourceMuting the sound Surround modes Stadium TheaterHall RoomEnjoying Surround Sound Dolby TruehdCancel the test tone function Adjusting each channel level with test toneEnter the test tone mode To cancel the surround mode for stereo operationRepeat the above steps 2 and 3 to adjust each channel level Adjusting the current channel levelAdjust the level of the selected channel as desired Press the Channel Level buttonMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsTuning Manual presettingTuning to preset stations Press the MEMORY/ENTER buttonSirius Satellite Radio only for North America Press the Tuning UP+/DOWN- buttons repeatedly to select SRTo sign up, access the website at Signing up for Sirius Satellite RadioCategory search Direct search→ DIR Srch → CAT Srch → OFF Presetting channels Preset searchParental lock When tuning in the previously locked channelsTune in the channel you want to lock or unlock Recording Dubbing the audio and video signals separately onto VideoTo record audio signals Dubbing from video components ontoDigital Audio Recording with MD Recorder Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusRoom 2 Source Playback Press the Room 2 button to enter the Room 2 modeSet the selected mode as desired Start play on the component related to the Room 2 sourceSelect the desired menu using the Cursor UP/DOWN buttons OSD Menu SettingsTurn the menu screen on When selecting the CH Level Setup When selecting the SPEAKER/ROOMEQSETUPWhen selecting the AMP Assign Setting the System SetupWhen selecting the items other than OSD Position Adjust Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Hdmi Audio OUT When selecting the Subwoofer ModeWhen selecting the Tone Control When selecting the Cinema EQ When selecting the Momentary OSDWhen selecting the OSD Position Adjust Setting the Input Setup When selecting the menu of page 2 orWhen selecting the Audio Assign When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio ModeWhen selecting the DC Trigger When selecting the Auto SurroundWhen selecting the AV Sync When selecting the HD AudioConfirm your entry When selecting the NameTo resume its factory input source name When selecting the Parental Lock When selecting the Edit Lock Code When selecting the Auto Setup Setting the Speaker / Room EQ SetupPreparations RD-7503A2008.11.4145PM페이지52 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup Memory mode Setting the CH Level SetupRepeat the above steps 1 and 2 to adjust each channel level Reference When selecting the Night Mode Setting the Sound ParameterAuto When selecting the Panorama mode When selecting the Dolby Plii MusicRepeat the above steps 2 and 3 to adjust other parameters When selecting the Center Width controlWhen selecting the Input Setting the Multi Room SetupWhen selecting the Room When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Setup Code Table TMK RCASSS CCEMEI KLHSTS ABC NSCSAT HTSRD-7503