Sherwood RD-7503 manual When selecting the Auto Surround, When selecting the AV Sync, Off

Page 47

RD-7503(A)2008.11.41:45PM페이지47

Continued

■When selecting the AUTO SURROUND

• Depending on how to select a surround mode, you can select the auto surround mode or the manual surround mode.

ON

: The optimum surround mode will be automatically selected depending on the signal

(Auto surround mode)

format being input.

�

 

OFF

: You can select the desired of different surround modes selectable for the signal being

(Manual surround mode)

input with using the MULTI CONTROL knob or the SURROUND MODE UP/DOWN ( >/< )

 

buttons. (For details, refer to "When selecting the manual surround mode with pressing the

 

SURROUND MODE button on the front panel" on page 25.)

■Notes :

 

•Even when the auto surround mode is selected and the same type of digital signal format is being input, the optimum surround mode may vary depending on whether the speaker type is set to "NO" or not.

•When the auto surround mode is selected, the surround modes other than the optimum surround mode cannot be selected.

■When selecting the AV SYNC

•There may be a slight time delay between the video and audio signals in case that some video playback equipments may process the video signals later than the audio signals due to signal processing procedure, etc.. Should this happen, you can adjust the time delay of audio signals to synchronize the sound with the picture.

•The time delay can be adjusted within the range of 0 ~ 200 msec.

■When selecting the DC TRIGGER

•To turn on the component connected to the DC TRIGGER OUT jack when this input source is selected, you should set the DC TRIGGER to ON for this input source.

OFF : To turn off the DC trigger function.

�

ON: To turn it on.

•For details, refer to "CONNECTING DC TRIGGER OUT" on page 11.

■When selecting the HD AUDIO

•When the source components that cannot support the HD audio signal format (such as Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio, DTS-HD Master Audio, etc.) are connected to the HDMI IN of this receiver, some components may not output any audio signals from its HDMI OUT.

In this case, you should set the HD AUDIO to OFF to play the audio signals other than the HD audio signals. (For details on the audio signal format, refer to the operating instructions of the source component.)

ON : To play the audio signals (including the HD audio signals).

�

OFF : To play the audio signals other than the HD audio signals.

ENGLISH

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents RD-7503 Important Safety Instructions 120 IntroductionRead this Before Operating Your Unit Contents System Connections Connecting AntennasConnecting Video Components Copyright protection system Connecting Audio ComponentsComponent video input default settings *2 Hdmi High Definition Multimedia Interface connection *1Digital input default settings Connecting External INSConnecting Digital INS and OUT Front Bi-Amp Connections Connecting SpeakersSurround back speakers Connecting Subwoofer PRE OUT Speaker placementConnecting DC Trigger OUT Connecting Room 2 OutsSiriusConnect Home Tuner Connecting for System ControlConnecting Sirius Connector only for North America AC Input CordFluorescent Display Front Panel ControlsRemote Sensor Front AUX in Jack Setup MIC JackBluetooth in Connector ENTER/SEARCH MODE, Select buttons Universal Remote ControlsPower on button UP/DOWN / buttons Numeric 0~9, +10 Input Selector buttonsFunction Table of the Numbered Buttons Loading Batteries Repeat the above steps 1 to 4 for each of your Components Entering a setup codeRemoving all punch-through functions Using a punch-through functionRemoving a punch-through function To change a macro program Programming a macro functionOperating a macro function To remove a macro programBefore operation OperationsListening to a Program Source Muting the sound When CD, F.AUX, Video 1~ 3 is selected as an input sourceListening with headphones Surround modes Room TheaterHall StadiumDolby Truehd Enjoying Surround SoundTo cancel the surround mode for stereo operation Adjusting each channel level with test toneEnter the test tone mode Cancel the test tone functionPress the Channel Level button Adjusting the current channel levelAdjust the level of the selected channel as desired Repeat the above steps 2 and 3 to adjust each channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsListening to Radio Broadcasts Auto tuningManual tuning Auto presettingPress the MEMORY/ENTER button Manual presettingTuning to preset stations TuningSigning up for Sirius Satellite Radio Press the Tuning UP+/DOWN- buttons repeatedly to select SRTo sign up, access the website at Sirius Satellite Radio only for North America→ DIR Srch → CAT Srch → OFF Direct searchCategory search Preset search Presetting channelsTune in the channel you want to lock or unlock When tuning in the previously locked channelsParental lock Dubbing from video components onto Dubbing the audio and video signals separately onto VideoTo record audio signals RecordingDigital Audio Recording with MD Recorder Displaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsStart play on the component related to the Room 2 source Press the Room 2 button to enter the Room 2 modeSet the selected mode as desired Room 2 Source PlaybackTurn the menu screen on OSD Menu SettingsSelect the desired menu using the Cursor UP/DOWN buttons When selecting the SPEAKER/ROOMEQSETUP When selecting the CH Level SetupPress the Cursor UP/DOWN buttons to select the desired item Setting the System SetupWhen selecting the items other than OSD Position Adjust When selecting the AMP AssignWhen selecting the Tone Control When selecting the Subwoofer ModeWhen selecting the Hdmi Audio OUT When selecting the Momentary OSD When selecting the Cinema EQWhen selecting the OSD Position Adjust When selecting the menu of page 2 or Setting the Input SetupWhen selecting the Audio Mode When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio AssignWhen selecting the HD Audio When selecting the Auto SurroundWhen selecting the AV Sync When selecting the DC TriggerTo resume its factory input source name When selecting the NameConfirm your entry When selecting the Parental Lock When selecting the Edit Lock Code Preparations Setting the Speaker / Room EQ SetupWhen selecting the Auto Setup RD-7503A2008.11.4145PM페이지52 When selecting the Speaker Configuration About the speaker distance When selecting the Speaker DistanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup Repeat the above steps 1 and 2 to adjust each channel level Setting the CH Level SetupMemory mode Reference Auto Setting the Sound ParameterWhen selecting the Night Mode When selecting the Center Width control When selecting the Dolby Plii MusicRepeat the above steps 2 and 3 to adjust other parameters When selecting the Panorama modeWhen selecting the Volume Setting the Multi Room SetupWhen selecting the Room When selecting the InputProblem Possible Cause Remedy Troubleshooting GuideSpecifications Setup Code Table CCE RCASSS TMKSTS KLHMEI NSC ABCHTS SATRD-7503
Top Page Image Contents