Sherwood RD-7503 manual Adjusting each channel level with test tone, Enter the test tone mode

Page 26

RD-7503(A)2008.11.41:45PM페이지26

ENGLISH

Continued

�To cancel the surround mode for stereo operation

• Depending on the signal format which is being input, either the stereo mode or the 2CH downmix mode is selected.

• To cancel either the stereo mode or the 2CH downmix mode, select the surround mode with using the MULTI CONTROL knob on the front panel or the SURROUND MODE UP/DOWN (�/�) buttons on the remote control.

�2CH downmix mode

•This mode allows the multi-channel signals encoded in DTS or Dolby Digital format, etc. to be mixed down into 2 front channels and to be reproduced through only two front speakers or through headphones.

•When the SPEAKER button is set to off to listen with headphones while playing the multi-channel digital signals from DTS or Dolby Digital sources, etc., it will enter the 2CH downmix mode automatically.

Adjusting each channel level with test tone

•The volume level of each channel can be adjusted easily with the test tone function. �Note : When the SPEAKER button is set to off, the test tone function does not work.

1. Enter the test tone mode.

• The test tone mode is displayed and will be heard from the speaker of each channel for 2 seconds as follows:

	→ FL → C →				FR →	SR

	Front Left		Center	Front Right		Surround Right
		SUB	← SL (	←	SB )	or ( SBL ← SBR) ←

	Subwoofer		Surround Left		Surround Back Surr.Back Left Surr.Back Right

• When the speaker setting is "NO", the test tone of the corresponding channel is not available.

• ( ) : Possible depending on whether the surround back channel is set to "2 CH" or "1 CH".

2. At each channel, adjust the level as desired until the sound level of each speaker is heard to be equally loud.

• You can select the desired channel with pressing the

CONTROL UP/DOWN (▲/▼) buttons or the CURSOR

UP/DOWN (▲/▼) buttons.

3. Cancel the test tone function.

26

Image 26

Contents RD-7503 Important Safety Instructions 120 IntroductionRead this Before Operating Your Unit Contents Connecting Antennas System ConnectionsConnecting Video Components Hdmi High Definition Multimedia Interface connection *1 Connecting Audio ComponentsComponent video input default settings *2 Copyright protection systemDigital input default settings Connecting External INSConnecting Digital INS and OUT Front Bi-Amp Connections Connecting SpeakersSurround back speakers Speaker placement Connecting Subwoofer PRE OUTConnecting Room 2 Outs Connecting DC Trigger OUTAC Input Cord Connecting for System ControlConnecting Sirius Connector only for North America SiriusConnect Home TunerFluorescent Display Front Panel ControlsRemote Sensor Front AUX in Jack Setup MIC JackBluetooth in Connector UP/DOWN / buttons Numeric 0~9, +10 Input Selector buttons Universal Remote ControlsPower on button ENTER/SEARCH MODE, Select buttonsFunction Table of the Numbered Buttons Loading Batteries Entering a setup code Repeat the above steps 1 to 4 for each of your ComponentsRemoving all punch-through functions Using a punch-through functionRemoving a punch-through function To remove a macro program Programming a macro functionOperating a macro function To change a macro programBefore operation OperationsListening to a Program Source Muting the sound When CD, F.AUX, Video 1~ 3 is selected as an input sourceListening with headphones Surround modes Stadium TheaterHall RoomEnjoying Surround Sound Dolby TruehdCancel the test tone function Adjusting each channel level with test toneEnter the test tone mode To cancel the surround mode for stereo operationRepeat the above steps 2 and 3 to adjust each channel level Adjusting the current channel levelAdjust the level of the selected channel as desired Press the Channel Level buttonMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto presetting Auto tuningManual tuning Listening to Radio BroadcastsTuning Manual presettingTuning to preset stations Press the MEMORY/ENTER buttonSirius Satellite Radio only for North America Press the Tuning UP+/DOWN- buttons repeatedly to select SRTo sign up, access the website at Signing up for Sirius Satellite Radio→ DIR Srch → CAT Srch → OFF Direct searchCategory search Presetting channels Preset searchTune in the channel you want to lock or unlock When tuning in the previously locked channelsParental lock Recording Dubbing the audio and video signals separately onto VideoTo record audio signals Dubbing from video components ontoDigital Audio Recording with MD Recorder Other Functions Operating the sleep timerAdjusting the brightness of the fluorescent display Displaying the operation statusRoom 2 Source Playback Press the Room 2 button to enter the Room 2 modeSet the selected mode as desired Start play on the component related to the Room 2 sourceTurn the menu screen on OSD Menu SettingsSelect the desired menu using the Cursor UP/DOWN buttons When selecting the CH Level Setup When selecting the SPEAKER/ROOMEQSETUPWhen selecting the AMP Assign Setting the System SetupWhen selecting the items other than OSD Position Adjust Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Tone Control When selecting the Subwoofer ModeWhen selecting the Hdmi Audio OUT When selecting the Cinema EQ When selecting the Momentary OSDWhen selecting the OSD Position Adjust Setting the Input Setup When selecting the menu of page 2 orWhen selecting the Audio Assign When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio ModeWhen selecting the DC Trigger When selecting the Auto SurroundWhen selecting the AV Sync When selecting the HD AudioTo resume its factory input source name When selecting the NameConfirm your entry When selecting the Parental Lock When selecting the Edit Lock Code Preparations Setting the Speaker / Room EQ SetupWhen selecting the Auto Setup RD-7503A2008.11.4145PM페이지52 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup Repeat the above steps 1 and 2 to adjust each channel level Setting the CH Level SetupMemory mode Reference Auto Setting the Sound ParameterWhen selecting the Night Mode When selecting the Panorama mode When selecting the Dolby Plii MusicRepeat the above steps 2 and 3 to adjust other parameters When selecting the Center Width controlWhen selecting the Input Setting the Multi Room SetupWhen selecting the Room When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Setup Code Table TMK RCASSS CCESTS KLHMEI ABC NSCSAT HTSRD-7503