Sherwood manual RD-7503A2008.11.4145PM페이지52

Page 52

RD-7503(A)2008.11.41:45PM페이지52

Continued

2. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the AUTO SETUP, then press the ENTER button.

ENGLISH

3. Press the CURSOR UP(▲)/DOWN(▼) buttons to select the START, then press the ENTER button.

When the auto setup has been completed.

•Loud test tones are output successively and then if a series of auto setup procedure has been completed, "COMPLETED" will be displayed.

•To stop the auto setup procedure while performing it, press the ENTER button.

In such a case that the auto setup procedure is stopped before "COMPLETED" is displayed, the results of each adjustment can not be memorized.

•If there may be a problem with speaker or microphone connection, error message will be displayed. In this case, turn off the power, check the connection and then retry the auto setup procedure.

■Notes :

•Because the test tones are loud, ensure there no infants or small children in the room.

•For best results, ensure the room is as quiet as possible during the auto setup procedure. If there is too much ambient noise, the results may not be satisfactory.

4. To memorize the results, press the CURSOR LEFT(◀)/ RIGHT(▶) buttons to select the APPLY, then press the ENTER button.

• Then the results are memorized and the SPEAKER/ ROOM EQ SETUP menu is displayed.

• Each time the CURSOR LEFT(◀)/ RIGHT(▶) buttons are pressed, the APPLY or the CANCEL is selected.

• When the CANCEL is selected, the results are not memorized.

•Check the results on each setup menu(SPEAKER CONFIGURATION menu on page 53, SPEAKER DISTANCE menu on page 54, SPEAKER CROSSOVER menu on page 55 and CH LEVEL SETUP menu for "CALIBRATE" mode on page 57).

•If the results are not satisfactory, you can retry the auto setup procedure or personalize your speaker setup and channel level setup by making the settings manually. (For details, refer to "When selecting the SPEAKER CONFIGURATION" on page 53, "When selecting the SPEAKER DISTANCE" on page 54, "When selecting the SPEAKER CROSSOVER" on page 55, "Adjusting each channel level with test tone" on page 26 and "Adjusting the current channel level" on page 27.)

52

Image 52

Contents RD-7503 Important Safety Instructions Read this Before Operating Your Unit Introduction120 Contents Connecting Antennas System ConnectionsConnecting Video Components Connecting Audio Components Component video input default settings *2Hdmi High Definition Multimedia Interface connection *1 Copyright protection systemConnecting Digital INS and OUT Connecting External INSDigital input default settings Surround back speakers Connecting SpeakersFront Bi-Amp Connections Speaker placement Connecting Subwoofer PRE OUTConnecting Room 2 Outs Connecting DC Trigger OUTConnecting for System Control Connecting Sirius Connector only for North AmericaAC Input Cord SiriusConnect Home TunerRemote Sensor Front Panel ControlsFluorescent Display Bluetooth in Connector Setup MIC JackFront AUX in Jack Universal Remote Controls Power on buttonUP/DOWN / buttons Numeric 0~9, +10 Input Selector buttons ENTER/SEARCH MODE, Select buttonsFunction Table of the Numbered Buttons Loading Batteries Entering a setup code Repeat the above steps 1 to 4 for each of your ComponentsRemoving a punch-through function Using a punch-through functionRemoving all punch-through functions Programming a macro function Operating a macro functionTo remove a macro program To change a macro programListening to a Program Source OperationsBefore operation Listening with headphones When CD, F.AUX, Video 1~ 3 is selected as an input sourceMuting the sound Surround modes Theater HallStadium RoomEnjoying Surround Sound Dolby TruehdAdjusting each channel level with test tone Enter the test tone modeCancel the test tone function To cancel the surround mode for stereo operationAdjusting the current channel level Adjust the level of the selected channel as desiredRepeat the above steps 2 and 3 to adjust each channel level Press the Channel Level buttonMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto tuning Manual tuningAuto presetting Listening to Radio BroadcastsManual presetting Tuning to preset stationsTuning Press the MEMORY/ENTER buttonPress the Tuning UP+/DOWN- buttons repeatedly to select SR To sign up, access the website atSirius Satellite Radio only for North America Signing up for Sirius Satellite RadioCategory search Direct search→ DIR Srch → CAT Srch → OFF Presetting channels Preset searchParental lock When tuning in the previously locked channelsTune in the channel you want to lock or unlock Dubbing the audio and video signals separately onto Video To record audio signalsRecording Dubbing from video components ontoDigital Audio Recording with MD Recorder Operating the sleep timer Adjusting the brightness of the fluorescent displayOther Functions Displaying the operation statusPress the Room 2 button to enter the Room 2 mode Set the selected mode as desiredRoom 2 Source Playback Start play on the component related to the Room 2 sourceSelect the desired menu using the Cursor UP/DOWN buttons OSD Menu SettingsTurn the menu screen on When selecting the CH Level Setup When selecting the SPEAKER/ROOMEQSETUPSetting the System Setup When selecting the items other than OSD Position AdjustWhen selecting the AMP Assign Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Hdmi Audio OUT When selecting the Subwoofer ModeWhen selecting the Tone Control When selecting the Cinema EQ When selecting the Momentary OSDWhen selecting the OSD Position Adjust Setting the Input Setup When selecting the menu of page 2 orWhen selecting the Hdmi Assign When selecting the Video AssignWhen selecting the Audio Assign When selecting the Audio ModeWhen selecting the Auto Surround When selecting the AV SyncWhen selecting the DC Trigger When selecting the HD AudioConfirm your entry When selecting the NameTo resume its factory input source name When selecting the Parental Lock When selecting the Edit Lock Code When selecting the Auto Setup Setting the Speaker / Room EQ SetupPreparations RD-7503A2008.11.4145PM페이지52 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup Memory mode Setting the CH Level SetupRepeat the above steps 1 and 2 to adjust each channel level Reference When selecting the Night Mode Setting the Sound ParameterAuto When selecting the Dolby Plii Music Repeat the above steps 2 and 3 to adjust other parametersWhen selecting the Panorama mode When selecting the Center Width controlSetting the Multi Room Setup When selecting the RoomWhen selecting the Input When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Setup Code Table RCA SSSTMK CCEMEI KLHSTS ABC NSCSAT HTSRD-7503