Sherwood RD-7503 manual Connecting External INS, Connecting Digital INS and OUT

Page 8

RD-7503(A)2008.11.41:45PM페이지8

ENGLISH

4. CONNECTING EXTERNAL INS

• Use these jacks to connect the corresponding outputs of a DVD player or external decoder, etc. that has 6, 7 or 8 channel analog audio outputs.

• In case of 6 or 7 channel outputs, do not connect both of the SURROUND BACK L and R inputs or the SURROUND BACK R input of this unit. (For details, refer to the operating instructions of the component to be connected.)

5. CONNECTING DIGITAL INS AND OUT

The OPTICAL and the COAXIAL DIGITAL OUTs of the components that are connected to this unit can be

connected to these DIGITAL INs.

• A digital input should be connected to the components such as a CD player, DVD player, etc. capable of outputting DTS Digital Surround, Dolby Digital or PCM format digital signals, etc.

• If the component with OPTICAL IN jack is connected to the OPTICAL OUT jack of this unit, you can record the high quality sound of CDs, etc. without degradation.

• For details, refer to the operating instructions of the component connected.

• When making the COAXIAL DIGITAL connection, be sure to use a 75 Ω COAXIAL cord, not a conventional AUDIO cord.

• All of the commercially available optical fiber cords cannot be used for the equipment. If there is an optical fiber cord which cannot be connected to your equipment, consult your dealer or nearest service organization.

Notes :

Be sure to make either a OPTICAL or a COAXIAL DIGITAL connection on each component. (You don’t need to do both.)

Depending on the digital audio signal format input into the HDMI IN connector, some digital signals cannot be output from the OPTICAL OUT jack.

Digital input default settings

If you connect the DIGITAL INs to your components, it is easier to do so following the default settings.

If your DIGITAL connections are different from default settings, you should assign the DIGITAL INs you used with the "When selecting the AUDIO ASSIGN" procedure on page 46.

The default settings are as follows :

OPTICAL IN 1:VIDEO 1, OPTICAL IN 2:VIDEO 2/iPod, COAXIAL IN 1 : CD, COAXIAL IN 2 : F. AUX

8

Image 8
Contents RD-7503 Important Safety Instructions 120 IntroductionRead this Before Operating Your Unit Contents Connecting Antennas System ConnectionsConnecting Video Components Connecting Audio Components Component video input default settings *2Hdmi High Definition Multimedia Interface connection *1 Copyright protection systemDigital input default settings Connecting External INSConnecting Digital INS and OUT Front Bi-Amp Connections Connecting SpeakersSurround back speakers Speaker placement Connecting Subwoofer PRE OUTConnecting Room 2 Outs Connecting DC Trigger OUTConnecting for System Control Connecting Sirius Connector only for North AmericaAC Input Cord SiriusConnect Home TunerFluorescent Display Front Panel ControlsRemote Sensor Front AUX in Jack Setup MIC JackBluetooth in Connector Universal Remote Controls Power on buttonUP/DOWN / buttons Numeric 0~9, +10 Input Selector buttons ENTER/SEARCH MODE, Select buttonsFunction Table of the Numbered Buttons Loading Batteries Entering a setup code Repeat the above steps 1 to 4 for each of your ComponentsRemoving all punch-through functions Using a punch-through functionRemoving a punch-through function Programming a macro function Operating a macro functionTo remove a macro program To change a macro programBefore operation OperationsListening to a Program Source Muting the sound When CD, F.AUX, Video 1~ 3 is selected as an input sourceListening with headphones Surround modes Theater HallStadium RoomEnjoying Surround Sound Dolby TruehdAdjusting each channel level with test tone Enter the test tone modeCancel the test tone function To cancel the surround mode for stereo operationAdjusting the current channel level Adjust the level of the selected channel as desiredRepeat the above steps 2 and 3 to adjust each channel level Press the Channel Level buttonMemorizing the adjusted channel levels Recalling the memorized channel levelsAuto tuning Manual tuningAuto presetting Listening to Radio BroadcastsManual presetting Tuning to preset stationsTuning Press the MEMORY/ENTER buttonPress the Tuning UP+/DOWN- buttons repeatedly to select SR To sign up, access the website atSirius Satellite Radio only for North America Signing up for Sirius Satellite Radio→ DIR Srch → CAT Srch → OFF Direct searchCategory search Presetting channels Preset searchTune in the channel you want to lock or unlock When tuning in the previously locked channelsParental lock Dubbing the audio and video signals separately onto Video To record audio signalsRecording Dubbing from video components ontoDigital Audio Recording with MD Recorder Operating the sleep timer Adjusting the brightness of the fluorescent displayOther Functions Displaying the operation statusPress the Room 2 button to enter the Room 2 mode Set the selected mode as desiredRoom 2 Source Playback Start play on the component related to the Room 2 sourceTurn the menu screen on OSD Menu SettingsSelect the desired menu using the Cursor UP/DOWN buttons When selecting the CH Level Setup When selecting the SPEAKER/ROOMEQSETUPSetting the System Setup When selecting the items other than OSD Position AdjustWhen selecting the AMP Assign Press the Cursor UP/DOWN buttons to select the desired itemWhen selecting the Tone Control When selecting the Subwoofer ModeWhen selecting the Hdmi Audio OUT When selecting the Cinema EQ When selecting the Momentary OSDWhen selecting the OSD Position Adjust Setting the Input Setup When selecting the menu of page 2 orWhen selecting the Hdmi Assign When selecting the Video AssignWhen selecting the Audio Assign When selecting the Audio ModeWhen selecting the Auto Surround When selecting the AV SyncWhen selecting the DC Trigger When selecting the HD AudioTo resume its factory input source name When selecting the NameConfirm your entry When selecting the Parental Lock When selecting the Edit Lock Code Preparations Setting the Speaker / Room EQ SetupWhen selecting the Auto Setup RD-7503A2008.11.4145PM페이지52 When selecting the Speaker Configuration When selecting the Speaker Distance About the speaker distanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup Repeat the above steps 1 and 2 to adjust each channel level Setting the CH Level SetupMemory mode Reference Auto Setting the Sound ParameterWhen selecting the Night Mode When selecting the Dolby Plii Music Repeat the above steps 2 and 3 to adjust other parametersWhen selecting the Panorama mode When selecting the Center Width controlSetting the Multi Room Setup When selecting the RoomWhen selecting the Input When selecting the VolumeTroubleshooting Guide Problem Possible Cause RemedySpecifications Setup Code Table RCA SSSTMK CCESTS KLHMEI ABC NSCSAT HTSRD-7503