Sherwood RD-7503 Recording, Dubbing from video components onto, Video, To record audio signals

Page 35

RD-7503(A)2008.11.41:45PM페이지35

RECORDING

•The analog signals from the EXTERNAL INs as well as the digital signals from the HDMI IN, the OPTICAL or the COAXIAL DIGITAL IN can be heard but cannot be recorded.

•When recording the analog signals from CD, F.AUX, VIDEO 1~3, be sure to select "ANALOG" for the AUDIO MODE. (For details, refer to "When selecting the AUDIO MODE" on page 46.)

•The volume and tone (bass, treble) settings have no effect on the recording signals.

ENGLISH

Dubbing from video components onto

VIDEO 1

1. Select the desired of VIDEO 2(/iPod) ~ 3 as a recording source except VIDEO 1.

2. Start recording on the VIDEO 1.

3. Start play on the desired input.

•The audio and video signals from the desired input will be dubbed onto the VIDEO 1 and you can enjoy them on the TV set and from the speakers.

�To record audio signals

•Connect the AUDIO IN/OUT jacks of "VIDEO 1" to audio recording equipment such as a tape deck, an MD recorder, etc. and select the desired of tuner, CD, F.AUX, TAPE, BT and VIDEO 2(/iPod)~3 as a recording source. Then you can record the audio signals from the selected input.

Dubbing the audio and video signals separately onto VIDEO 1

�Note :

•To dub the audio and video signals separately, you should select these recording sources with pressing the INPUT SELECTOR buttons on the remote control, not the INPUT SELECTOR knob on the front panel.

Example: When dubbing the VIDEO 2(/iPod) video signal and the CD audio signal separately onto VIDEO 1.

1. Select VIDEO 2/iPod as a video recording source.

2. Select CD as an audio recording source.

3. Start recording on the VIDEO 1.

4. Start play on the VIDEO 2/iPod and the CD respectively.

•The audio signal from the CD and the video signal from the VIDEO 2/iPod will be dubbed and you can enjoy them on the TV set and from the speakers.

�Note :

• Be sure to observe the order of the above steps 1 and 2.

35

Image 35

Contents RD-7503 Important Safety Instructions 120 IntroductionRead this Before Operating Your Unit Contents System Connections Connecting AntennasConnecting Video Components Copyright protection system Connecting Audio ComponentsComponent video input default settings *2 Hdmi High Definition Multimedia Interface connection *1Digital input default settings Connecting External INSConnecting Digital INS and OUT Front Bi-Amp Connections Connecting SpeakersSurround back speakers Connecting Subwoofer PRE OUT Speaker placementConnecting DC Trigger OUT Connecting Room 2 OutsSiriusConnect Home Tuner Connecting for System ControlConnecting Sirius Connector only for North America AC Input CordFluorescent Display Front Panel ControlsRemote Sensor Front AUX in Jack Setup MIC JackBluetooth in Connector ENTER/SEARCH MODE, Select buttons Universal Remote ControlsPower on button UP/DOWN / buttons Numeric 0~9, +10 Input Selector buttonsFunction Table of the Numbered Buttons Loading Batteries Repeat the above steps 1 to 4 for each of your Components Entering a setup codeRemoving all punch-through functions Using a punch-through functionRemoving a punch-through function To change a macro program Programming a macro functionOperating a macro function To remove a macro programBefore operation OperationsListening to a Program Source Muting the sound When CD, F.AUX, Video 1~ 3 is selected as an input sourceListening with headphones Surround modes Room TheaterHall StadiumDolby Truehd Enjoying Surround SoundTo cancel the surround mode for stereo operation Adjusting each channel level with test toneEnter the test tone mode Cancel the test tone functionPress the Channel Level button Adjusting the current channel levelAdjust the level of the selected channel as desired Repeat the above steps 2 and 3 to adjust each channel levelRecalling the memorized channel levels Memorizing the adjusted channel levelsListening to Radio Broadcasts Auto tuningManual tuning Auto presettingPress the MEMORY/ENTER button Manual presettingTuning to preset stations TuningSigning up for Sirius Satellite Radio Press the Tuning UP+/DOWN- buttons repeatedly to select SRTo sign up, access the website at Sirius Satellite Radio only for North America→ DIR Srch → CAT Srch → OFF Direct searchCategory search Preset search Presetting channelsTune in the channel you want to lock or unlock When tuning in the previously locked channelsParental lock Dubbing from video components onto Dubbing the audio and video signals separately onto VideoTo record audio signals RecordingDigital Audio Recording with MD Recorder Displaying the operation status Operating the sleep timerAdjusting the brightness of the fluorescent display Other FunctionsStart play on the component related to the Room 2 source Press the Room 2 button to enter the Room 2 modeSet the selected mode as desired Room 2 Source PlaybackTurn the menu screen on OSD Menu SettingsSelect the desired menu using the Cursor UP/DOWN buttons When selecting the SPEAKER/ROOMEQSETUP When selecting the CH Level SetupPress the Cursor UP/DOWN buttons to select the desired item Setting the System SetupWhen selecting the items other than OSD Position Adjust When selecting the AMP AssignWhen selecting the Tone Control When selecting the Subwoofer ModeWhen selecting the Hdmi Audio OUT When selecting the Momentary OSD When selecting the Cinema EQWhen selecting the OSD Position Adjust When selecting the menu of page 2 or Setting the Input SetupWhen selecting the Audio Mode When selecting the Hdmi AssignWhen selecting the Video Assign When selecting the Audio AssignWhen selecting the HD Audio When selecting the Auto SurroundWhen selecting the AV Sync When selecting the DC TriggerTo resume its factory input source name When selecting the NameConfirm your entry When selecting the Parental Lock When selecting the Edit Lock Code Preparations Setting the Speaker / Room EQ SetupWhen selecting the Auto Setup RD-7503A2008.11.4145PM페이지52 When selecting the Speaker Configuration About the speaker distance When selecting the Speaker DistanceWhen selecting the Speaker Crossover When selecting the Room EQ Setup Repeat the above steps 1 and 2 to adjust each channel level Setting the CH Level SetupMemory mode Reference Auto Setting the Sound ParameterWhen selecting the Night Mode When selecting the Center Width control When selecting the Dolby Plii MusicRepeat the above steps 2 and 3 to adjust other parameters When selecting the Panorama modeWhen selecting the Volume Setting the Multi Room SetupWhen selecting the Room When selecting the InputProblem Possible Cause Remedy Troubleshooting GuideSpecifications Setup Code Table CCE RCASSS TMKSTS KLHMEI NSC ABCHTS SATRD-7503