ELAN Home Systems U102110-07 manual Conversion, You will also need the following tools, Rawlplugs

Page 27

Conversion

All models are supplied set for use on group H natural gas. A conversion kit for LP gas is included with the appliance. See the instructions that are supplied with the conversion kit. After converting the appliance please attach the Gas Conversion sticker over the appropriate area of the data badge, this will identify the gas type the appliance is now set for.

This appliance is designed for domestic cooking only. Use for any other purpose could invalidate any warranty or liability claim.

You will need the following equipment to complete the cooker installation satisfactorily

STABILITY BRACKET

If the cooker is to be supplied with gas through a flexible hose, a stability bracket or chain must be fitted.

These are not supplied by with the cooker but are available at most builders’ merchants.

GAS PRESSURE TESTER

FLEXIBLE GAS HOSE

Must be in accordance with the relevant standards.

MULTIMETER

(for electrical checks)

You will also need the following tools:

1.Electric drill

2.Masonry drill bit

(only required if fitting the cooker on a stone or concrete floor)

3.Rawlplugs

(only required if fitting the cooker on a stone or concrete floor)

4.Steel tape measure

5.Cross head screwdriver

6.Flat head screwdriver

7.4mm & 3mm Allen keys

8.Spirit level

9.Pencil

10.Adjustable spanner

11.Screws for fitting stability bracket

Checking the parts

4 pan supports

Griddle plate

Grill pan and trivet

Levelling tool

Handyrack

Meat tin

4 Main oven shelves

Splashback & Plinth

Conversion kit from Natural gas to LP gas

27

Image 27

Contents Dual Fuel Users Guide Be safe Gas and Electricity onPeculiar smells Contents Hotplate Burners Griddle High/mediumMedium/low Care and Cleaning Wok cradleEssential information Grill Left Hand Oven Right Hand Oven OvensClock To turn off the key lock Auto is showing, you want to reset to manual cookingClock Special Features To activate the key lockBoth Ovens Cooking using the timerMulti-function oven functions Multi-function ovenConventional oven top and base heat HandyrackOven shelves SteamOven light Storage To remove the drawer pull it fully forwardTo refit the draw Cooking chart Fan assisted oven function Multi-function Oven cooking guideEnsure meat and poultry is fully cooked before serving Fish Oven Cooking chart Conventional and full Fan oven functionsWok burners Cleaning your cookerHotplate burners Central hotplateOvens GriddleGrill Control Panel and DoorsHotplate Part Finish Recommended Cleaning Method Cleaning TableMoving your cooker Troubleshooting Oven light is not working Oven temperature getting hotter as the cooker gets olderTurn off the power supply Grill not cooking properlyGeneral Safety Instructions If you smell gas0800 111 This appliance is heavy, take care when moving it Location of Cooker InstallationDear Installer Provision of VentilationElectric drill Masonry drill bit ConversionYou will also need the following tools Checking the partsPositioning the Cooker Unpacking the CookerMoving the Cooker Levelling Fit the HandlesHandles should be above the fixings Gas Connection Pressure testingFitting the splash back Fitting a stability bracketFitting the plinth Electrical ConnectionHotplate Oven checkStick on label Tap adjustmentConversion to LP gas JetsServicing Notes To Change a Hotpate burner jet To Remove a ThermostatTo Change Grill Controller To Change a Hotplate TapTo Change Oven Door Seal To Adjust Oven Door Catch KeepTo Change Oven Door Outer Panel To Change Oven Door CatchTo Remove an Oven fan Element To Remove Oven Inner BackTo Remove the LH Oven Bottom and Top Elements To Replace an Oven FanCircuit Diagram Connections Technical DataDimensions This cooker is category II2H3+Ratings