ELAN Home Systems U102110-07 manual To Remove Oven Inner Back, To Replace an Oven Fan

Page 36

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

20. To Remove Oven Inner Back.

Open the oven door. Remove oven furniture. For the LH oven unscrew the 2 thermostat phial fixing screws.

the leads and connect to the replacement elements and re-assemble parts in reverse order. Check operation of grill.

25 To Remove the LH Oven Bottom and Top Elements

Disconnect from the electricity supply.

Bottom Element

Pull the cooker forward to access the cover boxes at the rear of the unit. Remove the fixings that secure the cover and lift it clear.

Remove the fixings that secure the inner back to the oven rear.

Lift the removable panel away. Re-assemble in reverse order. Ensure that the retaining fixings are fully tightened. For the LH oven unscrew the 2 thermostat phial fixing screws. Remove the screws that secure the inner back to the oven rear. Lift the removable panel away. Re-assemble in reverse order. Ensure that the retaining fixings are fully tightened.

22. To Replace an Oven Fan

Disconnect from electricity supply.

Pull the unit forward to access the cover boxes at the rear of the appliance. Remove the fixings that secure the cover and lift it clear. Remove the fan wiring, noting the connection positions. Remove the inner back as detailed in Section 20. Hold the fan blades and undo the centre nut (LH thread), brass washers, fan blade and Circlip. Undo the fixings that retain the fan and remove it from the cavity rear. Fit the replacement and re-assemble parts in reverse order. Check that the oven operates satisfactorily.

23. To Remove an Oven fan Element

Disconnect from electricity supply.

Remove the inner back as detailed in Section 20. Remove the fixings that secure the element within the oven and lift the element away carefully. Disconnect the leads and connect to the replacement element and re-assemble parts in reverse order. Check that the oven operates correctly.

24. To Remove Grill Element.

Disconnect from electricity supply.

Remove grill pan from grill chamber. From inside grill compartment remove enamelled front shield from grill roof, 2 screws and washers. Remove 2 screws and washers securing the grill element front support. Remove 1 screw from each of the grill elements and withdraw grill elements from grill chamber. Disconnect

Remove the 2 screws ‘A’ and allow the plate to drop down.

Remove the 2 screws B, holding the element to the bottom sheet..

Disconnect the leads, noting their positions.

Withdraw bottom element. Fit the new element and re- assemble parts in reverse order.

Top Element

Open the LH oven door and undo the fixings that secure the heat shield. Remove the top element bracket fixings and withdraw element. Replace the element and re-assemble parts in reverse order. Check that the oven operates satisfactorily.

26. To change oven light bulb.

Disconnect from the electricity supply.

Remove the oven furniture. Unscrew the bulb.

Fit an Edison screw fitting 15w 125-130v lamp, FOR OVENS. It must be a special bulb, heat resistant to 300 °C.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Dual Fuel Users Guide Be safe Gas and Electricity onPeculiar smells Contents Hotplate Burners Griddle High/mediumMedium/low Care and Cleaning Wok cradleEssential information Grill Ovens Left Hand Oven Right Hand OvenClock Auto is showing, you want to reset to manual cooking Clock Special FeaturesTo activate the key lock To turn off the key lockCooking using the timer Both OvensMulti-function oven Multi-function oven functionsHandyrack Conventional oven top and base heatOven shelves SteamOven light Storage To remove the drawer pull it fully forwardTo refit the draw Cooking chart Fan assisted oven function Multi-function Oven cooking guideEnsure meat and poultry is fully cooked before serving Oven Cooking chart Conventional and full Fan oven functions FishCleaning your cooker Hotplate burnersCentral hotplate Wok burnersGriddle GrillControl Panel and Doors OvensCleaning Table Hotplate Part Finish Recommended Cleaning MethodMoving your cooker Troubleshooting Oven temperature getting hotter as the cooker gets older Turn off the power supplyGrill not cooking properly Oven light is not workingGeneral Safety Instructions If you smell gas0800 111 This appliance is heavy, take care when moving it Installation Dear InstallerProvision of Ventilation Location of CookerConversion You will also need the following toolsChecking the parts Electric drill Masonry drill bitPositioning the Cooker Unpacking the CookerMoving the Cooker Levelling Fit the HandlesHandles should be above the fixings Pressure testing Fitting the splash backFitting a stability bracket Gas ConnectionElectrical Connection HotplateOven check Fitting the plinthTap adjustment Conversion to LP gasJets Stick on labelServicing Notes To Remove a Thermostat To Change Grill ControllerTo Change a Hotplate Tap To Change a Hotpate burner jetTo Adjust Oven Door Catch Keep To Change Oven Door Outer PanelTo Change Oven Door Catch To Change Oven Door SealTo Remove Oven Inner Back To Remove the LH Oven Bottom and Top ElementsTo Replace an Oven Fan To Remove an Oven fan ElementCircuit Diagram Technical Data DimensionsThis cooker is category II2H3+ ConnectionsRatings
Top Page Image Contents