ELAN Home Systems U102110-07 manual Conversion to LP gas, Jets, Stick on label, Tap adjustment

Page 32

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.

Conversion to LP gas

Check in the Technical Data section at the back of the book that the cooker is convertible to the gas you want to use.

This conversion must be performed by a competent person. After conversion the installation must comply with the relevant regulations and also the local electricity supply company requirements. Read the instructions before converting this appliance.

Failure to convert the appliance correctly could invalidate any warranty or liability claims and lead to prosecution.

This instruction must be used in conjunction with the rest of the appliance instruction, in particular for information on Standards, cooker positioning, connection hose suitability etc.

When servicing or replacing gas-carrying components disconnect from gas before commencing operation and check appliance is gas sound after completion.

Do not use re-conditioned or unauthorised gas controls.

Jets

Standard burner

Wok burner

Remove the 2 cross headed screws that were hidden by the hand rail end brackets.

Open the oven door & or grill door and remove the fixing screws underneath the control panel. NB some models have a plate under the facia held in place by the bottom fixing screws.

Lower facia panel clear of top retaining tags.

A tap bypass screw

Turn the bypass screw on each gas control clockwise to the stop.

Stick on label

Stick the appropriate label on to the data badge to indicate the gas the appliance is now set for.

A jet, B internal injector, C external injector

Remove burner caps and heads. Remove old jets. Fit new jets (see Technical Data section at the back of the book for correct jets). Reassemble in reverse order.

Tap adjustment

Pull off all the control knobs. If the hand rail has been fitted remove it - remove the plastic blanking plugs and remove the 2 end bracket fixing screws.

Pressure Testing

Connect the appliance to the gas supply. Check the appliance is gas sound.

The gas pressure can be measured at one of the left hand hotplate burner jets. Lift off a burner head. Fit the pressure gauge to the jet. Turn on the hotplate burner and turn on and light one of the other burners.

Reassemble burner top, making sure it is reassembled in the correct way on the burner body.

Check the appliance is gas sound. Check operation of all the burners.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Dual Fuel Users Guide Peculiar smells Be safeGas and Electricity on Contents Hotplate Burners Medium/low GriddleHigh/medium Essential information Care and CleaningWok cradle Grill Ovens Left Hand Oven Right Hand OvenClock Auto is showing, you want to reset to manual cooking Clock Special FeaturesTo activate the key lock To turn off the key lockCooking using the timer Both OvensMulti-function oven Multi-function oven functionsHandyrack Conventional oven top and base heatOven light Oven shelvesSteam To refit the draw StorageTo remove the drawer pull it fully forward Ensure meat and poultry is fully cooked before serving Cooking chart Fan assisted oven functionMulti-function Oven cooking guide Oven Cooking chart Conventional and full Fan oven functions FishCleaning your cooker Hotplate burnersCentral hotplate Wok burnersGriddle GrillControl Panel and Doors OvensCleaning Table Hotplate Part Finish Recommended Cleaning MethodMoving your cooker Troubleshooting Oven temperature getting hotter as the cooker gets older Turn off the power supplyGrill not cooking properly Oven light is not working0800 111 General Safety InstructionsIf you smell gas This appliance is heavy, take care when moving it Installation Dear InstallerProvision of Ventilation Location of CookerConversion You will also need the following toolsChecking the parts Electric drill Masonry drill bitMoving the Cooker Positioning the CookerUnpacking the Cooker Handles should be above the fixings LevellingFit the Handles Pressure testing Fitting the splash backFitting a stability bracket Gas ConnectionElectrical Connection HotplateOven check Fitting the plinthTap adjustment Conversion to LP gasJets Stick on labelServicing Notes To Remove a Thermostat To Change Grill ControllerTo Change a Hotplate Tap To Change a Hotpate burner jetTo Adjust Oven Door Catch Keep To Change Oven Door Outer PanelTo Change Oven Door Catch To Change Oven Door SealTo Remove Oven Inner Back To Remove the LH Oven Bottom and Top ElementsTo Replace an Oven Fan To Remove an Oven fan ElementCircuit Diagram Technical Data DimensionsThis cooker is category II2H3+ ConnectionsRatings
Top Page Image Contents