Pitco Frialator SSPG14, SSRS14 Drain System, GAS Combustion System, Ventilation Hood

Page 25

SSPG14: Floor Model High Efficiency Gas Pasta Cooker

PREVENTATIVE MAINTENANCE

3.3.4.TANK

Verify that the tank is in good condition. corrosion. Verify that tank is leak free. blockage.

Check for scale build up and inspect for signs of Check drain overflow for scale build up and debris

3.3.5.DRAIN SYSTEM

Verify that drain valve is in good condition. Check for leaks in the seal area and fitting region.

Verify that drain lines are leak free, kink free and in good condition. Check for scale build up and debris blockage. Verify that the clamps and connections are securely tightened.

3.3.6.GAS COMBUSTION SYSTEM

Check for gas leaks.

Check and clean vent tube on gas valve pressure regulator.

Check burners, clean debris and grease from pilot and pilot orifice tips.

Check and adjust burner manifold gas pressure to nameplate reading.

Check incoming gas pressure when all gas appliances are on.

Check ignition system and adjust pilot flame as required.

Check flame sensor reading.

Recheck for gas leaks after inspection.

3.4.VENTILATION HOOD

Proper ventilation hood operation is very important for the correct operation of this appliance and the safety of personnel. The ventilation hood should be inspected at the time of installation of this appliance to insure that it will operate properly in conjunction with the appliance. A regular schedule of examination, in accordance with ANSI/NFPA 96 latest edition and/or local codes must be followed.

L20-331, rev.02 (08/11)

21

Image 25
Contents English To the Purchaser To the PURCHASER, Owner and Store ManagerTable of Contents Table of Contents Accessories InstallationChecking Your NEW Appliance Non-Combustible Construction Installation ClearancesInches centimeters Back 15.24cm 0.0cm Sides LEG/CASTER Installation and Leveling Water Inlet Connections Plumbing ConnectionsDrain Connections GAS Connection Fuel Supply Line Leak and Pressure TestingQuick Disconnect Connection I2H NATModel not Approved for USE with LP GAS NAT I3PI2L I2ENON CE GAS Table Electrical Connections Ventilation and Fire Safety SystemsInternational Inspection Filling the Appliance Initial AdjustmentsCombustibles Lighting InstructionsSelf Cleaning Burner System Main Burner System Adjustment Initial Cleaning Operation Operational FeaturesOperation Description Water Capacity Filling the ApplianceSSPG14 Appliance Start UPTo enter boil mode To enter simmer modeCooking Manual Water Fill Standby ModeCooking Tips Appliance ShutdownDaily Preventative Maintenance Preventative MaintenanceDo not leave the appliance unattended during cleaning Cleaning the CabinetController Monthly Preventative MaintenanceGAS Combustion System Drain SystemVentilation Hood Power Failure TroubleshootingHigh Temperature Limit Switch Drain Valve InterlockProblem Probable Causes Corrective Actions Troubleshooting ChartDisplay Problem Action Controller Warning DisplaysL20-331, rev.02 08/11

SSPG14, SSRS14 specifications

The Pitco Frialator SSRS14 and SSPG14 are state-of-the-art commercial frying solutions designed for restaurants and food service establishments that prioritize efficiency, safety, and frying quality. These fryers are engineered to handle high-volume frying needs while delivering consistent results.

One of the standout features of the SSRS14 is its four-pan capability, allowing for a substantial amount of food to be fried simultaneously. This model is built for versatility, catering to various food items from crispy fries to perfectly fried chicken. The SSPG14, on the other hand, comes with a single fry pot but boasts a higher frying capacity, making it ideal for establishments that require flexibility without compromising on output.

Both models are equipped with advanced temperature control systems. The computerized control panel ensures precise temperature regulation, enhancing cooking efficiency and food quality. The oil management system is another highlight, which helps maintain optimal oil quality over longer periods. This not only reduces oil wastage but also improves the flavor profile of the fried products.

The fryers feature Pitco’s renowned frying oil filtration system, which extends the life of the oil. By efficiently removing food particles and other impurities, this technology contributes to both cost savings and enhanced food quality. Additionally, the SSRS14 and SSPG14’s stainless steel construction ensures durability and resistance to corrosion, promising longevity even in the face of heavy usage.

Safety is a top priority with both models. They come equipped with built-in safety features, including high-temperature limit switches that prevent overheating and potential hazards. The design also incorporates easy-access oil drainage systems for straightforward cleaning and maintenance, ensuring health standards are met effortlessly.

In terms of energy efficiency, the SSRS14 and SSPG14 utilize advanced heating technologies that require less energy while providing quick recovery times. This not only lowers operational costs but also contributes to a more sustainable kitchen environment.

In summary, the Pitco Frialator SSRS14 and SSPG14 are exceptional choices for food service operations looking to enhance their frying capabilities. Their combination of user-friendly features, advanced technology, and safety measures makes them indispensable assets for any commercial kitchen aiming to deliver high-quality fried foods consistently.