Kenmore 790.45 manual Setting Oven Lockout Feature, Pressdisplay, Silent control operation

Setting Oven Controls

Note: Adjustments to the Oven Lockout, Temperature Display, and Silent Control Operation features will not affect cooking results.

Setting Oven Lockout Feature

The (_TOPpad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

INSTRUCTIONS

To activate the Oven Lockout feature

1.Press and hold _ for 3 seconds.

2.After 3 seconds "Loc" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the '"DOORLOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure 1).

To reactivate normal oven operation:

1. Press and hold _oP_) for 3 seconds, A beep will sound. The

PRESSDISPLAY

for 3

seconds

Figure 1

Q for 3

"DOOR LOCKED'" will flash in the display until the oven door

has completely unlocked (Figure 2).

seconds

iiii'!jii_' :iiiiiiiiii:i

2. The wall oven is again fully operational.

Figure 2

.........!ii¸,.....

Setting Silent Control Operation

The DELAYTIME _ and FLEX CLEAN _ pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS

To change control from normal sound operation to

silent control operation

1.To tell if your range is set for normal or silent operation press

and hold @. '....==.==will appear and "DELAY" will flash in the

display (Figure 3). After 7 seconds "SP" (Speaker) will appear in the display, (Figure 4)

PRESSDISPLAY

@

Figure 3

for 7 seconds

2. Press @ to switch between normal sound operation and @

silent operation mode. The display will show either "SP" (Figure 4) or ":=="(Figure 5).

If "SP" appears (Figure 4), the control will operate with normal sounds and beeps. If ":==" appears (Figure 5), the control is in the silent operation mode.

, Press	to accept the change or press	to reject the
		O

Figure 4

Figure 5

change,

Note: The control will always beep at the end of a kitchen timer period, and will beep when a set temperature has been reached, even if the control is set to silent operation.

17