Makita EG711AE, EG301A, EG381AE, EG781AE, EG511AE manual Foreword, ［Caution］

Page 4

FOREWORD

Thank you for purchasing a Makita generator.

This manual covers operation and maintenance of the Makita generators. All information in this publication is based on the latest production information available at the time of approval for printing.

Pay special attention to statements preceded by the following words:

DANGER

Indicates a possibility of death or serious injury if instructions are not followed.

WARNING

Indicates a strong possibility of severe personal injury, loss of life and equipment damage if instructions are not followed.

［CAUTION］

Indicates a possibility of personal injury or equipment damage if instructions are not followed.

NOTE:

Gives helpful information.

If a problem should arise, or if you have any questions about the generator, consult an authorized dealer or service shop

WARNING

■The generator is designed to give safe and dependable service if operated according to instructions.

■Do not operate the generator before you have read and understood the instructions. Failure to do so could result in death, personal injury or equipment damage.

ENGLISH

Image 4

Contents EG series AIR Index Page Foreword ［CAUTION］Contents Safety Precautions － 1－－ 2－ Specifications － 3－Components － 4－EG711A, EG711AE, EG781A, EG781AE － 5－－ 6－ Check Engine OIL PRE-OPERATION Checks－ 7－ Up to Level position Check Engine Fuel－ 8－ Check Generator Surroundings Checking Component Parts－ 9－ Grounding Generator Cable firstTo positive + terminal － 10－Starting the Generator Operating Procedures－ 11－ Recoil starter model Electric starter model－ 13－ Using Electric Power － 14－To take power out from the Twist － 15－Gfci Receptacle － 16－Full Power Switch Except EG301A － 17－Only for charging 12 volt battery DC Circuit BreakerConnection of exclusive DC cable － 18－Battery Charging Procedures － 19－Stopping the Generator OIL Sensor［Recoil starter model］［Electric starter model］Wattage Information － 21－Voltage Drop in Electric Extension Cords － 22－Spark Arrester － 23－Maintenance Schedule Periodic MaintenanceDaily Inspection － 24－Periodic Maintenance Schedule table － 25－HOW-TO Maintenance Servicing the AIR CleanerEngine OIL Change － 26－Cleaning Fuel Strainer Cleaning and Adjusting Spark Plug－ 27－ Checking Carbon Brush － 28－Disassembly － 29－Preparation for Storage － 30－Troubleshooting When Engine Fails to StartWhen No Electricity Is Generated at Receptacle － 31－EG301A 60Hz-120V Wiring Diagram－ 32－ EG381A 60Hz-120/240V － 33－EG381AE 60Hz-120/240V Grn/Y Earth Ground terminalEG511A, EG711A, EG781A 60Hz-120/240V － 35－EG511AE, EG711AE, EG781AE 60Hz-120/240V － 36－Makita Corporation