Installing PTO Quick Coupler

Assembly Instructions

NOTE: When installing the DSD52 or DSD62 Mower deck, make sure to retract the dolly wheel after mounting the deck on the tractor.

3.If the deck is rear discharge (GHS equipped model), the rear discharge chute will need to be aligned and connected to the blower inlet dur- ing the last 2 in. (51 mm) of slide action on the support arms.

NOTE: Raising the mower body may be help- ful in fitting and guiding the deck chute into the blower.

4.Install the hitch pin through the hole on the end of each support arm to lock the deck in place (refer to Deck Counterweight Spring Installa- tion photo). Two (2) hitch pins are included in the owner’s packet of materials.

5.Connect the mower deck PTO drive shaft assembly to the tractor with the splined quick disconnect coupler. This coupler simplifies shaft alignment and installation.

a.Use the arrows on the shaft and tube to align and slide the PTO quick coupler onto the deck rectangular shaft.

b.Reaching under the tractor, pull the ring back on the coupler, slide onto the spline shaft on the tractor, and release the ring.

IMPORTANT: To prevent damage to the mower, make sure the PTO shaft assembly is securely locked on the tractor, with the locking balls fully seat- ed in the groove and the ring in the full forward po- sition (refer to the Coupler Ring “Locked” Position photo). After installation, pull on the shaft to check for security.

Pull Back Spring-Loaded

Coupler Ring

Installing PTO Quick Coupler

Spring-Loaded Coupler Ring

In Fully Forward Position

Coupler Ring “Locked” Position

6.Raise the front mower body (instead of lifting the front of deck) and clip the counterweight springs to the receptacle on front of body. Lower the front body to tension the springs. (Refer to Deck Counterweight Spring Instal- lation Photo.)

Grease Deck

Support Arms

PTO Connection

Arrows on Shaft and Tube

(used to align when sliding together)

Mower Deck Installation

(PTO Shaft Connection)

7.With the counterweight springs connected, the weight on the deck caster wheels should be 15 to 25 Ib (6.8 to 11.3 kg). Check this weight by lifting on the front of the deck carrier frame. If required, the spring tension can be adjusted by tightening or loosening the elastic stop nuts located underneath the lower spring hook. Refer to Deck Counterweight Spring Installa- tion photo.

MT specifications

Walker, Montana, is a quaint and picturesque town nestled in the heart of the Treasure State. With a population of just under 2,000 residents, it possesses a unique charm that combines the beauty of nature with a tight-knit community atmosphere. The surrounding landscape boasts rolling hills and expansive fields, providing a stunning backdrop for outdoor enthusiasts seeking adventure or tranquility.

One of the main features of Walker is its commitment to sustainability and environmental conservation. The community is known for its efforts in promoting green technologies and practices. Many residents engage in eco-friendly farming, utilizing organic methods to cultivate the land and promote biodiversity. The town also actively participates in recycling programs and initiatives aimed at reducing waste, making it a great model for small-town sustainability.

Walker is a hub for modern technologies, with a focus on connecting residents to the digital world while preserving its historic roots. High-speed internet has become increasingly accessible, allowing local businesses to thrive and residents to enjoy the benefits of online connectivity. This digital shift has enabled the emergence of remote work opportunities and e-commerce, which has been pivotal for the local economy.

The town's infrastructure includes well-maintained roads and public transport options, ensuring ease of access for both residents and visitors. The local government has invested in smart city technologies, such as intelligent traffic management systems and energy-efficient street lighting, enhancing safety and improving quality of life.

Culturally, Walker celebrates its heritage through various events and festivals throughout the year. The annual Walker Fair showcases local artisans, musicians, and food vendors, creating a lively atmosphere that fosters community spirit. Education is also a priority, with schools emphasizing technological literacy and environmental awareness, preparing the next generation to thrive in a rapidly changing world.

Walker, Montana, stands out as a model small town that seamlessly blends nature, innovation, and community engagement. With its focus on sustainability, modern technologies, and rich cultural heritage, Walker offers a unique lifestyle that appeals to residents and visitors alike. Whether one seeks adventure in the great outdoors or the comforts of a close-knit community, Walker truly embodies the essence of Montana living.